Difficulty

Easy

Steps

5

Time Required

                          10 minutes

Sections

3

  • How to unplug and discharge before repair
  • 2 steps
  • Dell Optiplex GX620 Side Panel Disassembly
  • 1 step
  • Network Adapter
  • 2 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Optiplex GX620

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Step 1

              How to unplug and discharge before repair
  • Power down your PC and remove the power cord from the back.

Power down your PC and remove the power cord from the back.

1024

Step 2

  • Press and hold the power button for about 10 seconds, then release.
  • This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.

Press and hold the power button for about 10 seconds, then release.

This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.

Step 3

              Dell Optiplex GX620 Side Panel Disassembly
  • With the computer standing upright, firmly pull on the tab at the back of the computer.
  • When the side panel pops free, gently pull the panel away from the computer.
  • If you have trouble freeing the side panel from the case, you may need to pull the tab a bit harder.

With the computer standing upright, firmly pull on the tab at the back of the computer.

When the side panel pops free, gently pull the panel away from the computer.

If you have trouble freeing the side panel from the case, you may need to pull the tab a bit harder.

Step 4

              Freeing the PCI slots
  • Gently push the release tab on the card retention latch from the inside to pivot the latch open. The latch will remain in the open position

Gently push the release tab on the card retention latch from the inside to pivot the latch open. The latch will remain in the open position

Step 5

              Removing the Network Adapter
  • With your free hand, gently squeeze the sides of the card. Pull upwards to release it from the tab slots that hold it in place.

With your free hand, gently squeeze the sides of the card. Pull upwards to release it from the tab slots that hold it in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors 


                    Kristina

Member since: 09/03/2014

195 Reputation

                                      7 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Pasco Hernando, Team 5-1, Prince Fall 2014                        

                                                  Member of Pasco Hernando, Team 5-1, Prince Fall 2014 



                    PHSC-PRINCE-F14S5G1                     


                                            10 Members                     


                                            15 Guides authored