Difficulty

Moderate

Steps

10

Time Required

                          10 - 30 minutes

Sections

3

  • How to unplug and discharge before repair
  • 2 steps
  • Dell Optiplex GX620 Side Panel Disassembly
  • 1 step
  • Fan
  • 7 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Optiplex GX620

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              How to unplug and discharge before repair
  • Power down your PC and remove the power cord from the back.

Power down your PC and remove the power cord from the back.

1024

Step 2

  • Press and hold the power button for about 10 seconds, then release.
  • This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.

Press and hold the power button for about 10 seconds, then release.

This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.

Step 3

              Dell Optiplex GX620 Side Panel Disassembly
  • With the computer standing upright, firmly pull on the tab at the back of the computer.
  • When the side panel pops free, gently pull the panel away from the computer.
  • If you have trouble freeing the side panel from the case, you may need to pull the tab a bit harder.

With the computer standing upright, firmly pull on the tab at the back of the computer.

When the side panel pops free, gently pull the panel away from the computer.

If you have trouble freeing the side panel from the case, you may need to pull the tab a bit harder.

Step 4

              Unplug your Hard drive.
  • Unplug your hard drives power and data cables.

Unplug your hard drives power and data cables.

Step 5

              Unplug floppy drive.
  • Unplug the power and data cables.

Unplug the power and data cables.

Step 6

              Unplug the fan.
  • Unplug the fan.

Unplug the fan.

Step 7

  • Remove the two Phillips #2 screws.

Remove the two Phillips #2 screws.

Step 8

              Remove the heat sink.
  • Pull the heat sink up.

Pull the heat sink up.

Step 9

  • Pull the two tabs and pull it out.
  • This needs a lot of force to take it off.

Pull the two tabs and pull it out.

This needs a lot of force to take it off.

Step 10

              Take the fan out of its enclosure.
  • To take the fan out you have to pull the two tabs and pull the fan out.

To take the fan out you have to pull the two tabs and pull the fan out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 1 other contributor 


                    Padraic Hoselton

Member since: 08/22/2017

4,027 Reputation

                                      12 Guides authored                  



                       Badges:
                       43







                                                        +40 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored