Difficulty
Easy
Steps
3
Time Required
10 minutes
Sections
2
- Case
- 1 step
- Hard Drive
- 2 steps
Flags
0
BackDell OptiPlex GX260
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Case
- Lay the Dell Optiplex GX260 down on a clean flat surface with the rear towards you.
- Push the oval shaped buttons located on the top and bottom of the PC simultaneously and lift the case straight up.
- Note: Some force may be required to push in the oval buttons open the PC case.
Lay the Dell Optiplex GX260 down on a clean flat surface with the rear towards you.
Push the oval shaped buttons located on the top and bottom of the PC simultaneously and lift the case straight up.
Note: Some force may be required to push in the oval buttons open the PC case.
1024
Step 2
Hard Drive
- Identify the Hard Drive in the case.
- If there is more than one hard drive installed the process is the same for each hard drive.
- Remove the power cable from the hard drive by squeezing the side tabs in and pulling gently.
- Remove the IDE cable from the hard drive by gently pulling the ribbon cable out.
Identify the Hard Drive in the case.
If there is more than one hard drive installed the process is the same for each hard drive.
Remove the power cable from the hard drive by squeezing the side tabs in and pulling gently.
Remove the IDE cable from the hard drive by gently pulling the ribbon cable out.
Step 3
- Pinch the two green tabs inwards to release the hard drive and lift it out.
Pinch the two green tabs inwards to release the hard drive and lift it out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
8 other people completed this guide.
Author
with 9 other contributors
Kevin Schapansky
Member since: 10/05/2010
1,448 Reputation
9 Guides authored
Badges:
15
+12 more badges
Team
Cal Poly, Team 4-48, Amido Fall 2010
Member of Cal Poly, Team 4-48, Amido Fall 2010
CPSU-AMIDO-F10S4G48
4 Members
27 Guides authored
Elvis 1357 - Nov 15, 2022
Reply
I got this yesterday….up and running now….how on earth do I MERGE the 18GB partition D with C….there is just NO option there.
Also, want to add another HD….but, there are no cables at all?