Dell Latitude St Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Battery
6 steps
Speaker
3 steps

Flags

BackDell Latitude ST
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Locate the back panel tab.
Press down on the tab to remove the panel.

Locate the back panel tab.

Press down on the tab to remove the panel.

1024

Step 2

Using a Phillips #0 screwdriver, remove the four 6mm screws attaching the inside panel to the device.

Using a Phillips #0 screwdriver, remove the four 6mm screws attaching the inside panel to the device.

Step 3

Use the blue plastic opening tool to push in the tab located on the backside of the device.
Slide the tool around the edges of the device to unsnap the tabs and pry the frame off.

Use the blue plastic opening tool to push in the tab located on the backside of the device.

Slide the tool around the edges of the device to unsnap the tabs and pry the frame off.

Step 4

Remove the three 6mm Phillips #0 screws attaching the battery.

Remove the three 6mm Phillips #0 screws attaching the battery.

Step 5

Using your hands or a plastic opening tool, unplug the white battery cable.
Push forward on the top part of the cable to disconnect it from the device.

Using your hands or a plastic opening tool, unplug the white battery cable.

Push forward on the top part of the cable to disconnect it from the device.

Step 6

Pull up on the black tab located at the top of the battery to remove the battery from the device.

Pull up on the black tab located at the top of the battery to remove the battery from the device.

Step 7

              Speaker

Using your hands or a plastic opening tool, disconnect the white speaker connector from its socket near the bottom of the motherboard.

Using your hands or a plastic opening tool, disconnect the white speaker connector from its socket near the bottom of the motherboard.

Step 8

Unscrew the 6mm Phillips #0 screw from the left side of the speaker.
Unscrew the 3mm Phillips #0 screw from the right side of the speaker.

Unscrew the 6mm Phillips #0 screw from the left side of the speaker.

Unscrew the 3mm Phillips #0 screw from the right side of the speaker.

Step 9

Using the plastic opening tool, pry the speaker up to remove it from the device.

Using the plastic opening tool, pry the speaker up to remove it from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Addie Kenney

Member since: 04/11/2017

413 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Eastern Washington University, Team S1-G1, Crane Spring 2017                        

                                                  Member of Eastern Washington University, Team S1-G1, Crane Spring 2017 



                    EWU-CRANE-S17S1G1                     


                                            3 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team