Difficulty
Easy
Steps
7
Time Required
5 minutes
Sections
2
- Battery
- 3 steps
- Hard Drive
- 4 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackDell Latitude E6530
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the computer over so that the bottom panel is facing you.
Flip the computer over so that the bottom panel is facing you.
1024
Step 2
- Slide the switches away from each other to release the battery.
Slide the switches away from each other to release the battery.
Step 3
- Using your hands, gently remove the battery from the device.
Using your hands, gently remove the battery from the device.
Step 4
Hard Drive
- Using a Phillips #00 screwdriver, unscrew the two screws.
Using a Phillips #00 screwdriver, unscrew the two screws.
Step 5
- Gently remove the hard drive.
Gently remove the hard drive.
Step 6
- Undo the Phillips #1 screw keeping the drive in the bracket.
Undo the Phillips #1 screw keeping the drive in the bracket.
Step 7
- Remove the drive from the bracket,
Remove the drive from the bracket,
To reassemble your device, follow these instructions in reverse order. Refer to the troubleshooting guide and additional links for more information if issue persists.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Amelia Jochem
Member since: 01/16/2020
243 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
Embry-Riddle Aeronautical University, Team S7-G2, Rauch Spring 2020
Member of Embry-Riddle Aeronautical University, Team S7-G2, Rauch Spring 2020
ERAU-RAUCH-S20S7G2
3 Members
5 Guides authored
Jonathan M. - Aug 30, 2020
Reply
There’s a missing step here. There’s another screw you’re supposed to undo to remove the drive.