Difficulty

Moderate

Steps

5

Time Required

                          7 minutes

Sections

2

  • Battery
  • 2 steps
  • Memory
  • 3 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Latitude E6440

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Pre-Removal Instructions Before removing the Battery
  • Make sure all external components are removed from the device( ie. USBs, power cords, network cables, headphones, etc.) and the device is powered off.

Make sure all external components are removed from the device( ie. USBs, power cords, network cables, headphones, etc.) and the device is powered off.

1024

Step 2

              Remove Battery
  • Slide the battery release latches into the unlock position. Then, rotate the outer edge of the battery upward and remove from the system.

Slide the battery release latches into the unlock position. Then, rotate the outer edge of the battery upward and remove from the system.

Step 3

              Remove base cover
  • After removing the battery, remove the screws that secure the base cover to the computer, then lift the base cover and remove it from the computer.

After removing the battery, remove the screws that secure the base cover to the computer, then lift the base cover and remove it from the computer.

Step 4

              Remove memory
  • Pry the securing clips away from the memory module until it pops-up and remove the memory module from its connector on the system board.

Pry the securing clips away from the memory module until it pops-up and remove the memory module from its connector on the system board.

Step 5

              Install new memory
  • With your new memory, insert the memory into the memory socket, then press the securing clips to secure the memory module to the system board.

With your new memory, insert the memory into the memory socket, then press the securing clips to secure the memory module to the system board.

Reassemble your device by performing the instructions above in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Aaron Thomas

Member since: 02/16/2021

1,194 Reputation

                                      10 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored