Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
2
- Battery
- 2 steps
- RAM
- 3 steps
Flags
0
BackDell Latitude E6410
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Unplug power cord and place computer upside down on your desk.
Unplug power cord and place computer upside down on your desk.
1024
Step 2
- Remove battery by sliding the locks inward and pushing the battery out.
Remove battery by sliding the locks inward and pushing the battery out.
Step 3
RAM
- Remove the following 5mm screws from the bottom of your laptop.
- Loosen the 5mm screw in the middle.
Remove the following 5mm screws from the bottom of your laptop.
Loosen the 5mm screw in the middle.
Step 4
- Remove bottom cover by sliding it downwards.
Remove bottom cover by sliding it downwards.
Step 5
- Remove first RAM card by pushing clips outwards
- Pull the RAM card out.
- Repeat this procedure for the second RAM card.
Remove first RAM card by pushing clips outwards
Pull the RAM card out.
Repeat this procedure for the second RAM card.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 1 other contributor
Stephen Tate
Member since: 11/06/2017
808 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
Baylor, Team S8-G2, Johnson Fall 2017
Member of Baylor, Team S8-G2, Johnson Fall 2017
BU-JOHNSON-F17S8G2
1 Member
4 Guides authored
