Difficulty
Moderate
Steps
6
Time Required
25 minutes
Sections
1
- Cooling Fan
- 6 steps
Flags
Missed a Step
Oops! This guide is currently missing some important steps.
BackDell Latitude E6410
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Cooling Fan
- Lay your laptop upside down on your desk.
- Remove the battery.
Lay your laptop upside down on your desk.
Remove the battery.
1024
Step 2
- Remove the following 5mm screws.
- Loosen the middle 5mm screw.
Remove the following 5mm screws.
Loosen the middle 5mm screw.
Step 3
- Remove the back cover by sliding it downwards.
Remove the back cover by sliding it downwards.
Step 4
- Unscrew the following 2mm screws.
- Remove the fan case.
- Do not pull hard enough to break the wires connected to the motor.
Unscrew the following 2mm screws.
Remove the fan case.
Do not pull hard enough to break the wires connected to the motor.
Step 5
- Unscrew the 1mm screws on the fan case.
Unscrew the 1mm screws on the fan case.
Step 6
- Remove the fan by pulling it away from the motor.
Remove the fan by pulling it away from the motor.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 1 other contributor
Stephen Tate
Member since: 11/06/2017
808 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
Baylor, Team S8-G2, Johnson Fall 2017
Member of Baylor, Team S8-G2, Johnson Fall 2017
BU-JOHNSON-F17S8G2
1 Member
4 Guides authored
