Dell Latitude E6400 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          30 minutes - 1 hour            

Sections

1

• Screen
• 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Latitude E6400

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Battery Removal               

• Disconnect AC power adaptor
• Push battery release tabs inwards.
• Slide the battery out of the computer.

Disconnect AC power adaptor

Push battery release tabs inwards.

Slide the battery out of the computer.

1024

Step 2

              Display Plastic Lids               

• Remove the two 4.8mm Phillips screws securing the plastic lids.
• Slide the plastic lids of the case

Remove the two 4.8mm Phillips screws securing the plastic lids.

Slide the plastic lids of the case

Step 3

              Display Data Cable               

• Grab the plastic pull tab secured to the display data cable lock and pull the display data cable connector straight up from its socket.
• De-route the display data cable from the channel.

Grab the plastic pull tab secured to the display data cable lock and pull the display data cable connector straight up from its socket.

De-route the display data cable from the channel.

Step 4

              Wi-Fi Antenna Cable               

• Using spudger lift and disconnect Wi-Fi antenna cable.
• De-route the Wi-Fi antenna cable from it’s channel.

Using spudger lift and disconnect Wi-Fi antenna cable.

De-route the Wi-Fi antenna cable from it’s channel.

Step 5

              Display Assembly               

• Open your laptop so the display is perpendicular to the upper case.
• Place your opened MacBook on a table as pictured.
• While holding the display and upper case together with your left hand, remove the two 4.8 mm Phillips screws from the display brackets.
• Grab the upper case with your right hand and rotate the display slightly away from the upper case. Lift the display away from the upper case, minding any brackets or cables that may get caught.

Open your laptop so the display is perpendicular to the upper case.

Place your opened MacBook on a table as pictured.

While holding the display and upper case together with your left hand, remove the two 4.8 mm Phillips screws from the display brackets.

Grab the upper case with your right hand and rotate the display slightly away from the upper case. Lift the display away from the upper case, minding any brackets or cables that may get caught.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    D. K. Labudek                     

Member since: 03/09/2018

685 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges