Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

1

  • Battery
  • 9 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Latitude E5570

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Buy replacement battery
  • Get a replacement battery.
  • e.g. via DELL Support: Part No. “CPL-TXF9M” or Part No. “HK6DV”. Costs approx. 40€

Get a replacement battery.

e.g. via DELL Support: Part No. “CPL-TXF9M” or Part No. “HK6DV”. Costs approx. 40€

1024

Step 2

              Loosen the screws on the housing
  • Use a small Phillips screwdriver to carefully unscrew the 8 marked screws.
  • ‘The screws cannot be removed from the base plate!’

Use a small Phillips screwdriver to carefully unscrew the 8 marked screws.

‘The screws cannot be removed from the base plate!’

Step 3

              Opening the housing
  • Carefully pry open the bottom cover and remove the cover plate.
  • The base plate is fastened all around with small plastic hooks. These should not get damaged.

Carefully pry open the bottom cover and remove the cover plate.

The base plate is fastened all around with small plastic hooks. These should not get damaged.

Step 4

              Laptop opened
  • After removing the bottom panel, the battery can be seen at the bottom right of the image.
  • Avoid touching or damaging any other components inside the laptop.

After removing the bottom panel, the battery can be seen at the bottom right of the image.

Avoid touching or damaging any other components inside the laptop.

Step 5

              Disconnecting the power connection between the battery and the laptop
  • To disconnect the battery from the laptop, pull the plug by the tab, straight out of the slot.

To disconnect the battery from the laptop, pull the plug by the tab, straight out of the slot.

Step 6

              Loosen the screw connection of the battery
  • After removing the two screws, the battery can be taken out

After removing the two screws, the battery can be taken out

Step 7

              Removing the cable from the battery
  • Place the battery on a flat surface and avoid bending the two battery cells!
  • Detach the cable from the clips between the two cells.
  • The connector on the battery itself can now be removed from the top of the battery by carefully pulling it out.

Place the battery on a flat surface and avoid bending the two battery cells!

Detach the cable from the clips between the two cells.

The connector on the battery itself can now be removed from the top of the battery by carefully pulling it out.

Step 8

              Installing the new battery
  • Connect the battery cable to the replacement battery and make sure that it is plugged in straight and without gaps (the contacts should no longer be visible).
  • Stow the cable between the two battery cells and reinsert the battery into the laptop.
  • Install the two retaining screws onto the battery and connect the battery to the laptop by gently pressing the connector into place from above.
  • Make sure that the battery is connected and inserted correctly. Verify that no parts are sticking out or are installed crooked.
  • Put the case cover back on the laptop and hook it into place by pressing lightly on the edge.
  • Now the 8 screws from step 2 can be tightened again.

Connect the battery cable to the replacement battery and make sure that it is plugged in straight and without gaps (the contacts should no longer be visible).

Stow the cable between the two battery cells and reinsert the battery into the laptop.

Install the two retaining screws onto the battery and connect the battery to the laptop by gently pressing the connector into place from above.

Make sure that the battery is connected and inserted correctly. Verify that no parts are sticking out or are installed crooked.

Put the case cover back on the laptop and hook it into place by pressing lightly on the edge.

Now the 8 screws from step 2 can be tightened again.

Step 9

              Initializing the battery
  • In order for the new battery to be recognized by the device, it must first be connected to the power supply and switched on.

In order for the new battery to be recognized by the device, it must first be connected to the power supply and switched on.

Follow theses steps in reverse order to reassemble your device

Cancel: I did not complete this guide.

        oldturkey03 is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

oldturkey03

Author

                                      with 1 other contributor 


                    Markus221

Member since: 10/02/2018

169 Reputation

                                      1 Guide authored                  



                       Badges:
                       1