Difficulty
Easy
Steps
11
Time Required
1 - 3 minutes
Sections
1
- Hard Drive
- 11 steps
Flags
3
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Latitude E5550
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Remove battery and base cover.
- Shut down your computer. Disconnect all power sources before opening the computer cover or panels.
- Remove the battery and base cover from the computer.
Shut down your computer. Disconnect all power sources before opening the computer cover or panels.
Remove the battery and base cover from the computer.
1024
Step 2
Remove screws and cable.
- Disconnect the hard-drive cable from its connector on the system board [1] .
- Remove the screws that secure the hard-drive assembly to the computer [2].
Disconnect the hard-drive cable from its connector on the system board [1] .
Remove the screws that secure the hard-drive assembly to the computer [2].
Step 3
Remove hard drive assembly
- Remove the hard-drive assembly from the computer.
Remove the hard-drive assembly from the computer.
Step 4
Release hard-drive cable
- Pull to release the hard-drive cable from its connector.
Pull to release the hard-drive cable from its connector.
Step 5
Remove screws to hard-drive bracket.
- Remove the screws that secure the hard-drive bracket to the hard drive [1] and remove the hard drive from the hard-drive bracket [2].
Remove the screws that secure the hard-drive bracket to the hard drive [1] and remove the hard drive from the hard-drive bracket [2].
Step 6
Place new hard drive on bracket and screws.
- Place the hard-drive bracket on the hard drive to align the screw holders and tighten the screws to secure the hard-drive bracket.
Place the hard-drive bracket on the hard drive to align the screw holders and tighten the screws to secure the hard-drive bracket.
Step 7
Connect cable to hard drive connector.
- Connect the hard-drive cable to its connector on the hard drive.
Connect the hard-drive cable to its connector on the hard drive.
Step 8
Put in hard-drive assembly.
- Place the hard-drive assembly into its slot on the computer.
Place the hard-drive assembly into its slot on the computer.
Step 9
Connect hard-drive cable to system board connector.
- Connect the hard-drive cable to its connector on the system board.
Connect the hard-drive cable to its connector on the system board.
Step 10
Tighten screws to secure hard drive assembly.
- Tighten the screws to secure the hard-drive assembly to the computer.
Tighten the screws to secure the hard-drive assembly to the computer.
Step 11
Install the battery and base cover.
- Install the battery and base cover.
Install the battery and base cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Hezekiah Brown
Member since: 02/11/2021
6,091 Reputation
50 Guides authored
Badges:
10
+7 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored