Dell Latitude E5550 5550 Coin Cell Battery Replacement 5550 Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          1 - 3 minutes            

Sections

1

• Coin Cell Battery
• 4 steps

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Latitude E5550

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Step 1

              Remove the following below.               

• Shut down your computer. Disconnect all power sources before opening the computer cover or panels.
• Remove the battery, base cover, memory module, and hard-drive assembly, keyboard trim, keyboard [itself], palmrest, display hinge-brackets, display assembly, system fan, and system board from the computer.

Shut down your computer. Disconnect all power sources before opening the computer cover or panels.

Remove the battery, base cover, memory module, and hard-drive assembly, keyboard trim, keyboard [itself], palmrest, display hinge-brackets, display assembly, system fan, and system board from the computer.

1024

Step 2

              Disconnect & remove coin-cell battery.               

• Disconnect the coin-cell battery cable from its connector on the system board [1].
• Pry the coin-cell battery to release from the adhesive and remove from the system board [2].

Disconnect the coin-cell battery cable from its connector on the system board [1].

Pry the coin-cell battery to release from the adhesive and remove from the system board [2].

Step 3

              Put coin-cell battery into its slot; connect coin-cell battery to cable.               

• Place the coin-cell battery into its slot on the system board.
• Connect the coin-cell battery cable to its connector on the system board.

Place the coin-cell battery into its slot on the system board.

Connect the coin-cell battery cable to its connector on the system board.

Step 4

              Install the following below.               

• Install the system board, system fan, display assembly, display-hinge brackets, palmrest, keyboard [itself], keyboard trim, hard-drive assembly, memory, battery, and base cover for the computer.

Install the system board, system fan, display assembly, display-hinge brackets, palmrest, keyboard [itself], keyboard trim, hard-drive assembly, memory, battery, and base cover for the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Hezekiah Brown                     

Member since: 02/11/2021

6,091 Reputation

                                      50 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored