Dell Latitude E5550 5550 Battery Replacement 5550 Repair Guide

Difficulty

Easy

Steps

10

Time Required

                          1 - 3 minutes            

Sections

1

• Battery
• 10 steps

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDell Latitude E5550

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Remove Cover               

• -Remove the sides on the back of the computer to take off the cover for the battery.

-Remove the sides on the back of the computer to take off the cover for the battery.

1024

Step 2

              Remove the battery               

• Disconnect battery cable from the connector and release cable from its routing channel.

Disconnect battery cable from the connector and release cable from its routing channel.

Step 3

              Screw removal               

• Remove the screw that secures the battery and lift and push to remove the battery from the computer.

Remove the screw that secures the battery and lift and push to remove the battery from the computer.

Step 4

              Insert the new battery               

• -Insert the battery into its place on the computer.

-Insert the battery into its place on the computer.

Step 5

              Route the cable               

• Route the battery cable through its routing channel.

Route the battery cable through its routing channel.

Step 6

              Tighten the battery screw               

• Tighten the screw to secure the battery to the computer.

Tighten the screw to secure the battery to the computer.

Step 7

              Connect the battery cable               

• Connect the battery cable to its connector on the system board.

Connect the battery cable to its connector on the system board.

Step 8

              Base cover installation               

• Install the base cover.

Install the base cover.

Step 9

              Connect the computer to outlets               

• Connect your computer and all attached devices to their electrical outlets.

Connect your computer and all attached devices to their electrical outlets.

Step 10

              Computer power on               

• Turn on your computer.

Turn on your computer.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Jaden Graham                     

Member since: 02/10/2021

211 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored