Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
1
- Wireless Card
- 6 steps
Flags
0
BackDell Latitude E5500
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Wireless Card
- Unscrew the single 3.5mm Phillips #1 screw that holds on the bottom plate of the device.
Unscrew the single 3.5mm Phillips #1 screw that holds on the bottom plate of the device.
1024
Step 2
- Place your hands on the plate and pull it toward yourself.
- The plate will pop out of place and may then be removed.
Place your hands on the plate and pull it toward yourself.
The plate will pop out of place and may then be removed.
Step 3
- The wireless card is located near the front of the device, and is the expansion card with three antennas attached to it.
The wireless card is located near the front of the device, and is the expansion card with three antennas attached to it.
Step 4
- Remove the wires connecting the card to the laptop with a pair of tweezers.
Remove the wires connecting the card to the laptop with a pair of tweezers.
Step 5
- Unscrew the 4mm Phillips #1 screw that secure the card in place.
Unscrew the 4mm Phillips #1 screw that secure the card in place.
Step 6
- After completing steps 4 & 5, the card will lift up at an angle as shown.
- Once the card has popped out of place, it can be gently removed.
After completing steps 4 & 5, the card will lift up at an angle as shown.
Once the card has popped out of place, it can be gently removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Richard Harrison
Member since: 10/23/2016
787 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
UMass Dartmouth, Team 2-4, Isaacson Fall 2016
Member of UMass Dartmouth, Team 2-4, Isaacson Fall 2016
UMASSD-ISAACSON-F16S2G4
3 Members
5 Guides authored
