Difficulty
Moderate
Steps
10
Time Required
40 minutes
Sections
1
- Screen Assembly
- 10 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Latitude E5470
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove Bottom Cover
- Loosen the 8 Philips screws on the bottom of the laptop. They will not come all the way out but loosen till they spin freely.
- Use a splurger to slowly pry the bottom cover off the laptop. Pull the bottom off in the direction of the arrow.
- Important Be carefull to not break the snaps as they are delicate.
Loosen the 8 Philips screws on the bottom of the laptop. They will not come all the way out but loosen till they spin freely.
Use a splurger to slowly pry the bottom cover off the laptop. Pull the bottom off in the direction of the arrow.
Important Be carefull to not break the snaps as they are delicate.
1024
Step 2
Disconnect Battery
- Important Disconnect the battery before any work is done. Failure to do so could result in electric shock and cause harm to you and the laptop.
- Carefully use the plastic tab to remove the battery cable from the motherboard.
Important Disconnect the battery before any work is done. Failure to do so could result in electric shock and cause harm to you and the laptop.
Carefully use the plastic tab to remove the battery cable from the motherboard.
Step 3
Disconnect Wireless Card
- Unscrew the screw holding the card in place.
- Remove the metal guard holding the connections in place.
- Use the splurger to gently lift the wires from the card.
Unscrew the screw holding the card in place.
Remove the metal guard holding the connections in place.
Use the splurger to gently lift the wires from the card.
Step 4
Disconnect Display
- Remove screw holding the metal plate in place.
- Remove metal plate
- Carefully pull on the tab to disconnect the display cable from the motherboard.
Remove screw holding the metal plate in place.
Remove metal plate
Carefully pull on the tab to disconnect the display cable from the motherboard.
Step 5
Free display cables
- Remove both screws holding the plate in place.
- Remove plate
- Remove tape holding the display cable to the laptop.
- Pull the cable free
Remove both screws holding the plate in place.
Remove plate
Remove tape holding the display cable to the laptop.
Pull the cable free
Step 6
Remove hinge covers
- Remove both the screws and hing covers on the back of the device.
Remove both the screws and hing covers on the back of the device.
Step 7
Remove display screws - Part 1
- Remove two screws from the bottom of the device
Remove two screws from the bottom of the device
Step 8
Remove display screws - Part 2
- Remove screws underneath the hinge covers on the back of the device
Remove screws underneath the hinge covers on the back of the device
Step 9
Remove display
- Carefully remove the display from its slots.
- Be mindful to feed the WiFi and Display cables through the holes.
Carefully remove the display from its slots.
Be mindful to feed the WiFi and Display cables through the holes.
Step 10
You are done!
- The display is now disconnected from the laptop.
The display is now disconnected from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 2 other contributors
Ethan Jones
Member since: 07/16/2018
539 Reputation
2 Guides authored
Badges:
9
+6 more badges