Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
2
- Mini Card Door
- 1 step
- MiniCard
- 3 steps
Flags
0
BackDell Latitude E4310
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Mini Card Door
- Remove the single Phillips #1 screw.
- This screw will not necessarily come off of the panel.
- Lift up and remove with your fingernail, or a spudger, from the side of the door with the screw.
Remove the single Phillips #1 screw.
This screw will not necessarily come off of the panel.
Lift up and remove with your fingernail, or a spudger, from the side of the door with the screw.
1024
Step 2
MiniCard
- Remove the single Phillips #1 screw.
Step 3
- Use a spudger to pry up the card.
- Pull the card up and out of its slot.
Use a spudger to pry up the card.
Pull the card up and out of its slot.
Step 4
- Pull the white and black antenna cables off of the card.
- Make note of these connectors (mark with a marker or pen) as they must be the right connectors for the card to work properly.
Pull the white and black antenna cables off of the card.
Make note of these connectors (mark with a marker or pen) as they must be the right connectors for the card to work properly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Brice Brosig
Member since: 02/21/2018
424 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
University of North Texas, Team S1-G5, Thompson Spring 2018
Member of University of North Texas, Team S1-G5, Thompson Spring 2018
UNT-THOMPSON-S18S1G5
4 Members
8 Guides authored
