Difficulty
Moderate
Steps
6
Time Required
4 minutes
Sections
2
- Battery
- 2 steps
- Keyboard
- 4 steps
Flags
0
BackDell Latitude E4310
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Power down the laptop and remove all power cords.
Power down the laptop and remove all power cords.
1024
Step 2
- Push in the battery release button with your thumb.
- Pull up on the battery to remove.
Push in the battery release button with your thumb.
Pull up on the battery to remove.
Step 3
Keyboard
- Insert the pointy end of the spudger underneath the power button panel and pry upwards to pop off.
- Do the same steps for the other side.
Insert the pointy end of the spudger underneath the power button panel and pry upwards to pop off.
Do the same steps for the other side.
Step 4
- Remove the two Phillips #0 screws.
Remove the two Phillips #0 screws.
Step 5
- Flip the laptop over and remove the two Phillips #0 screws.
Flip the laptop over and remove the two Phillips #0 screws.
Step 6
- Insert the pointy end of the spudger underneath the edge of the keyboard and pry upwards to lift up.
- Once lifted, grab the keyboard and pull out to remove.
Insert the pointy end of the spudger underneath the edge of the keyboard and pry upwards to lift up.
Once lifted, grab the keyboard and pull out to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Laura Lujan
Member since: 02/21/2018
326 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
University of North Texas, Team S1-G5, Thompson Spring 2018
Member of University of North Texas, Team S1-G5, Thompson Spring 2018
UNT-THOMPSON-S18S1G5
4 Members
8 Guides authored
