Dell Latitude E4200 Ram Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          5 minutes            

Sections

2

• Back Panel
• 3 steps
• RAM
• 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackDell Latitude E4200

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Back Panel               

• Use PH0 screwdriver to unscrew the 4.49x7.88 mm screw in the middle of the back panel.

Use PH0 screwdriver to unscrew the 4.49x7.88 mm screw in the middle of the back panel.

1024

Step 2

• Place thumbs flat on the front side of the back panel (the side to open the laptop).
• Push panel upwards sliding it out of the locked position.
• Lift panel out of socket.

Place thumbs flat on the front side of the back panel (the side to open the laptop).

Push panel upwards sliding it out of the locked position.

Lift panel out of socket.

Step 3

• Remove panel and screw from the device. This opens up the main board of the device.

Remove panel and screw from the device. This opens up the main board of the device.

Step 4

              Remove the back panel               

• Once you removed the back panel, the RAM will easily be located.
• Be sure to remove the battery first

Once you removed the back panel, the RAM will easily be located.

Be sure to remove the battery first

Step 5

              Take out the RAM               

• Place your thumbs on each side of the RAM tabs.
• Gently push outward on the tabs to release the RAM. This will allow you to remove the RAM completely from your device.
• The RAM should “bump up” after you push away the tabs.

Place your thumbs on each side of the RAM tabs.

Gently push outward on the tabs to release the RAM. This will allow you to remove the RAM completely from your device.

The RAM should “bump up” after you push away the tabs.

Step 6

• Gently grab each side of the RAM and remove it from the device.
• Please do not touch connection side of the RAM (shown in orange) with fingers. It might causes possible corrosion to the connection.

Gently grab each side of the RAM and remove it from the device.

Please do not touch connection side of the RAM (shown in orange) with fingers. It might causes possible corrosion to the connection.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Chao Wei                     

Member since: 03/22/2015

128 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Baylor, Team 5-6, Williams Spring 2015                        

                                                  Member of Baylor, Team 5-6, Williams Spring 2015 



                    BU-WILLIAMS-S15S5G6                     


                                            4 Members                     


                                            6 Guides authored