Dell Latitude E4200 Cmos Cr2032 Coin Cell Time Battery Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          3 - 5 minutes            

Sections

1

• CMOS (CR2032 coin-cell time battery)
• 6 steps

Flags

4

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackDell Latitude E4200

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Step 1

              Remove the battery, LED cover & keyboard.               

• Remove the battery, LED cover and keyboard.

Remove the battery, LED cover and keyboard.

1024

Step 2

              Pry up the coin-cell battery; remove battery from the computer               

• Pry up the coin-cell battery to release the double-sided adhesive tape on the bottom.
• Lift the coin-cell battery out of the computer.

Pry up the coin-cell battery to release the double-sided adhesive tape on the bottom.

Lift the coin-cell battery out of the computer.

Step 3

              Disconnect the battery cable from the system board.               

• Disconnect the battery cable from the system board.

Disconnect the battery cable from the system board.

Step 4

              Connect coin-cell battery cable to system board.               

• Connect the coin-cell battery cable to the system board.

Connect the coin-cell battery cable to the system board.

Step 5

              Insert coin-cell battery into the computer.               

• Insert the coin-cell battery into the computer.
• If you are re-installing the old coin-cell battery, press down to seal the tape on the bottom.
• If you are installing a new coin-cell battery, remove the adhesive backing from the battery, and slide the battery under the tab. Press to seal the tape on the bottom.

Insert the coin-cell battery into the computer.

If you are re-installing the old coin-cell battery, press down to seal the tape on the bottom.

If you are installing a new coin-cell battery, remove the adhesive backing from the battery, and slide the battery under the tab. Press to seal the tape on the bottom.

Step 6

              Replace keyboard, LED cover, and battery.               

• Replace keyboard, LED cover, and battery.

Replace keyboard, LED cover, and battery.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Hezekiah Brown                     

Member since: 02/11/2021

6,091 Reputation

                                      50 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored