Difficulty

Moderate

Steps

11

Time Required

                          10 - 15 minutes

Sections

3

  • Battery
  • 3 steps
  • Keyboard
  • 4 steps
  • Fan
  • 4 steps

Flags

0

  • BackDell Latitude D610

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the 3.9 mm Phillips #1 screw from the battery compartment.

Remove the 3.9 mm Phillips #1 screw from the battery compartment.

1024

Step 2

  • Locate the laptop battery release button lock
  • Push the battery release in the direction of the arrow, and pull upward.

Locate the laptop battery release button lock

Push the battery release in the direction of the arrow, and pull upward.

Step 3

  • Remove the battery from its compartment.

Remove the battery from its compartment.

Step 4

              Keyboard
  • Use an opening tool or flat tool to remove the plastic cover above the keyboard.

Use an opening tool or flat tool to remove the plastic cover above the keyboard.

Step 5

  • Remove the two 3.9mm Philips #1 screws that are holding the keyboard in place.

Remove the two 3.9mm Philips #1 screws that are holding the keyboard in place.

Step 6

  • Using an opening tool, carefully release the keyboard from the case.
  • Making sure not to tear or damage the wires still connecting it to the laptop.

Using an opening tool, carefully release the keyboard from the case.

Making sure not to tear or damage the wires still connecting it to the laptop.

Step 7

  • Carfully lift the key board.
  • Lift only about 3 - 4 inches so that the wires holding the keyboard do not get damaged.
  • Pull on the blue tab to unplug the keyboard.

Carfully lift the key board.

Lift only about 3 - 4 inches so that the wires holding the keyboard do not get damaged.

Pull on the blue tab to unplug the keyboard.

Step 8

              Fan
  • Remove the two 3.9mm Philips #1 screws from the case.

Remove the two 3.9mm Philips #1 screws from the case.

Step 9

  • Remove the sixteen 3.9mm Philips #1 screws from the back.

Remove the sixteen 3.9mm Philips #1 screws from the back.

Step 10

  • Turn the computer over. Using an opening tool seperate the top cover from the rest of the frame.
  • Do not open the computer too widely or quickly. Doing so will result in damage to the computer.

Turn the computer over. Using an opening tool seperate the top cover from the rest of the frame.

Do not open the computer too widely or quickly. Doing so will result in damage to the computer.

Step 11

  • Remove the 3.9 mm Philips #1 screw.
  • Unplug the fan cable.
  • Lift fan out of compartment to remove the fan.

Remove the 3.9 mm Philips #1 screw.

Unplug the fan cable.

Lift fan out of compartment to remove the fan.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Jordan Barham

Member since: 01/26/2014

447 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 6-24, Maness Winter 2014                        

                                                  Member of Cal Poly, Team 6-24, Maness Winter 2014 



                    CPSU-MANESS-W14S6G24                     


                                            4 Members                     


                                            5 Guides authored