Difficulty

Moderate

Steps

6

Time Required

                          10 - 20 minutes

Sections

2

  • Base Panel
  • 3 steps
  • SSD
  • 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDell Latitude 9410 2-in-1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

If you’re finding many corrupted files or data, software incompatibility, hard drive errors, or an overall faulty SSD, the SSD may need to be replaced entirely. Be sure to check the troubleshooting page before moving forward with replacement.

What you need

Step 1

              Base Panel
  • Ensure that the laptop is unplugged and powered off before beginning.
  • Place the laptop upside down on a flat surface.

Ensure that the laptop is unplugged and powered off before beginning.

Place the laptop upside down on a flat surface.

1024

Step 2

  • Use a Phillips #00 screwdriver to loosen the ten captive screws.
  • The screws are permanently fastened to the base panel; do not attempt to remove them.

Use a Phillips #00 screwdriver to loosen the ten captive screws.

The screws are permanently fastened to the base panel; do not attempt to remove them.

Step 3

  • Carefully lift off the back panel.

Carefully lift off the back panel.

Step 4

              SSD
  • Carefully peel back and remove the black tape around the top left corner of the motherboard.

Carefully peel back and remove the black tape around the top left corner of the motherboard.

Step 5

  • Use a Phillips #00 screwdriver to remove the 2 mm screw, loosening the bracket that covers the SSD.
  • Carefully lift the off the bracket.
  • The bracket is attached to the laptop and cannot be removed completely.

Use a Phillips #00 screwdriver to remove the 2 mm screw, loosening the bracket that covers the SSD.

Carefully lift the off the bracket.

The bracket is attached to the laptop and cannot be removed completely.

Step 6

  • Grip the SSD and pull directly backward until the SSD releases from its port.

Grip the SSD and pull directly backward until the SSD releases from its port.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Jessica Stephens

Member since: 02/08/2022

555 Reputation

                                      5 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Western Carolina University, Team 1-2, Virtue Spring 2022                        

                                                  Member of Western Carolina University, Team 1-2, Virtue Spring 2022 



                    WCU-VIRTUE-S22S1G2                     


                                            4 Members                     


                                            6 Guides authored