Difficulty

Easy

Steps

8

Time Required

                          10 - 20 minutes

Sections

2

  • Base Panel
  • 3 steps
  • Battery
  • 5 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDell Latitude 9410 2-in-1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Failure to charge or inability to hold a charge may indicate a faulty battery. Check the troubleshooting page before moving forward with the battery replacement as there are other potential causes that are easier to address, such as a faulty charging port.

What you need

Step 1

              Base Panel
  • Ensure that the laptop is unplugged and powered off before beginning.
  • Place the laptop upside down on a flat surface.

Ensure that the laptop is unplugged and powered off before beginning.

Place the laptop upside down on a flat surface.

1024

Step 2

  • Use a Phillips #00 screwdriver to loosen the ten captive screws.
  • The screws are permanently fastened to the base panel; do not attempt to remove them.

Use a Phillips #00 screwdriver to loosen the ten captive screws.

The screws are permanently fastened to the base panel; do not attempt to remove them.

Step 3

  • Carefully lift off the back panel.

Carefully lift off the back panel.

Step 4

              Battery
  • Use a Philips #00 screwdriver to remove the five 3mm screws that secure the battery.

Use a Philips #00 screwdriver to remove the five 3mm screws that secure the battery.

Step 5

  • Use a Philips #00 screwdriver to remove one 4.5 mm screw.

Use a Philips #00 screwdriver to remove one 4.5 mm screw.

Step 6

  • Grip the battery cable near the plug and pull it straight out, in the direction of the cable.

Grip the battery cable near the plug and pull it straight out, in the direction of the cable.

Step 7

  • Use tweezers to gently move the speaker ribbon cable away from the bottom of the battery.
  • The ribbon cable is thin and fragile; handle it carefully.
  • The ribbon cable only needs to be moved so that the battery can be removed; do not completely remove the ribbon cable.

Use tweezers to gently move the speaker ribbon cable away from the bottom of the battery.

The ribbon cable is thin and fragile; handle it carefully.

The ribbon cable only needs to be moved so that the battery can be removed; do not completely remove the ribbon cable.

Step 8

  • Lift the battery out with two hands.

Lift the battery out with two hands.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Jessica Stephens

Member since: 02/08/2022

555 Reputation

                                      5 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Western Carolina University, Team 1-2, Virtue Spring 2022                        

                                                  Member of Western Carolina University, Team 1-2, Virtue Spring 2022 



                    WCU-VIRTUE-S22S1G2                     


                                            4 Members                     


                                            6 Guides authored