Difficulty

Moderate

Steps

8

Time Required

                          10 - 20 minutes            

Sections

2

  • Bottom Panel
  • 5 steps
  • Battery
  • 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDell Latitude 7390

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before beginning this repair, be sure to turn off your laptop and unplug from the power adapter.

What you need

Step 1

              Bottom Panel               
  • Orient your Dell Latitude 7390 laptop so that it is facing towards you as if you’re going to open it.

Orient your Dell Latitude 7390 laptop so that it is facing towards you as if you’re going to open it.

1024

Step 2

  • Flip your laptop over so that the bottom is facing up.

Flip your laptop over so that the bottom is facing up.

Step 3

  • Using your Phillips #1 screwdriver, remove the eight 6 mm screws around the border of the bottom panel.

Using your Phillips #1 screwdriver, remove the eight 6 mm screws around the border of the bottom panel.

Step 4

  • Using an opening tool or picks, work your way around the periphery and pry the back case off.

Using an opening tool or picks, work your way around the periphery and pry the back case off.

Step 5

  • Finally, lift the back panel off to uncover the inside of your Dell Latitude 7390.

Finally, lift the back panel off to uncover the inside of your Dell Latitude 7390.

Step 6

              Battery               
  • Make sure the laptop is turned OFF and unplugged from the power adapter before taking the battery out.
  • Use the Phillips #1 screwdriver to remove the five 6 mm screws holding the battery in place along the edges of the battery.

Make sure the laptop is turned OFF and unplugged from the power adapter before taking the battery out.

Use the Phillips #1 screwdriver to remove the five 6 mm screws holding the battery in place along the edges of the battery.

Step 7

  • Be careful not to break the connector by pulling too hard on the black tab.
  • Pull the black tab on the top of the connector to unplug the battery from the motherboard.

Be careful not to break the connector by pulling too hard on the black tab.

Pull the black tab on the top of the connector to unplug the battery from the motherboard.

Step 8

  • Carefully lift the battery out of the laptop.

Carefully lift the battery out of the laptop.

To reassemble your device, follow these instructions in reverse order with your replacement battery.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Julia Blahut                     

Member since: 02/22/2022

240 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Clemson, Team 1-4, Hunter Spring 2022                        

                                                  Member of Clemson, Team 1-4, Hunter Spring 2022 



                    CLEM-HUNTER-S22S1G4                     


                                            5 Members                     


                                            5 Guides authored