Difficulty

Moderate

Steps

2

Time Required

                          10 - 20 minutes

Sections

  • Base Cover
  • 1 step
  • Solid-State Drive
  • 1 step

Flags

3

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Latitude 5521

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Base Cover Removal
  • Remove the 9 phillips #0 screws from the bottom of the case.
  • Carefully pry open the base cover with your spudger. Work your way around the case slowly, being careful not to damage any of the components inside.
  • Once removed you will have access to the contents of your case.

Remove the 9 phillips #0 screws from the bottom of the case.

Carefully pry open the base cover with your spudger. Work your way around the case slowly, being careful not to damage any of the components inside.

Once removed you will have access to the contents of your case.

1024

Step 2

              Solid-State Drive
  • Locate the solid-state drive.
  • Remove the screw on the right side of the drive.
  • After remove the screw, the drive will “pop-up” to approximately a 45% angle. Pull the drive straight out in accordance with the angle.
  • Static electricity is always a danger. Take precautions to protect the drive while, and once, it is removed.

Locate the solid-state drive.

Remove the screw on the right side of the drive.

After remove the screw, the drive will “pop-up” to approximately a 45% angle. Pull the drive straight out in accordance with the angle.

Static electricity is always a danger. Take precautions to protect the drive while, and once, it is removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Michael Engle

Member since: 10/14/2021

461 Reputation

                                      5 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge