Difficulty

Moderate

Steps

5

Time Required

                          30 minutes            

Sections

3

  • Back Cover
  • 2 steps
  • Battery
  • 1 step
  • Touchpad
  • 2 steps

Flags

0

  • BackDell Latitude 3380

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before starting the replacement, make sure to power down the laptop completely and drain the battery by pressing the power button a few times. Also, make sure to have the touchpad replacement and tools.

What you need

Step 1

              Back Cover               
  • Turn the laptop over so that the back is facing up.
  • Remove the nine 3 mm screws with a Phillips #0 screwdriver.

Turn the laptop over so that the back is facing up.

Remove the nine 3 mm screws with a Phillips #0 screwdriver.

1024

Step 2

  • Use an opening tool to pry the back cover away from the laptop.

Use an opening tool to pry the back cover away from the laptop.

Step 3

              Battery               
  • Remove the three 3 mm screws using a Phillips #0 screwdriver
  • Disconnect the the cable connected to the battery using a spudger.
  • Lift up on the outer edges of the battery to remove it from the laptop.

Remove the three 3 mm screws using a Phillips #0 screwdriver

Disconnect the the cable connected to the battery using a spudger.

Lift up on the outer edges of the battery to remove it from the laptop.

Step 4

              Touchpad               
  • Unplug the touchpad cable using a spudger.
  • Remove the seven screws with a Phillips #0 screwdriver.
  • Remove the metal plate and place it to the side.

Unplug the touchpad cable using a spudger.

Remove the seven screws with a Phillips #0 screwdriver.

Remove the metal plate and place it to the side.

Step 5

  • Remove the three screws with the Phillips #0 screwdriver.
  • Remove the touchpad from the laptop.

Remove the three screws with the Phillips #0 screwdriver.

Remove the touchpad from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Cristofer                     

Member since: 09/02/2021

169 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Gateway, Team 1-3, Pee Fall 2021                        

                                                  Member of Gateway, Team 1-3, Pee Fall 2021 



                    GCC-PEE-F21S1G3                     


                                            3 Members                     


                                            6 Guides authored