Difficulty

Moderate

Steps

9

Time Required

                          35 - 55 minutes

Sections

3

  • Base Cover
  • 2 steps
  • Battery
  • 4 steps
  • Power Switch Board
  • 3 steps

Flags

0

  • BackDell Latitude 3190

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The power switch board is a key component to tuning on your laptop and other components necessary to using the Dell Latitude 3190. This removal and replacement process requires no background experience and the list of needed tools are shown below.

What you need

Step 1

              Base Cover
  • Use a Phillips #0 screwdriver to remove the seven 7 mm screws securing the back case.

Use a Phillips #0 screwdriver to remove the seven 7 mm screws securing the back case.

1024

Step 2

  • Using a plastic opening tool carefully separate the plastic base cover from the rest of the laptop.
  • Lift the bottom cover from the laptop.

Using a plastic opening tool carefully separate the plastic base cover from the rest of the laptop.

Lift the bottom cover from the laptop.

Step 3

              Battery
  • Locate the battery.

Locate the battery.

Step 4

  • Disconnect the battery cable located on the top of the battery.
  • Use the spudger and disconnect the battery cable.
  • Pull the cable out of the way.

Disconnect the battery cable located on the top of the battery.

Use the spudger and disconnect the battery cable.

Pull the cable out of the way.

Step 5

  • Use a Phillips #0 screwdriver to remove the three 3 mm screws from the battery.

Use a Phillips #0 screwdriver to remove the three 3 mm screws from the battery.

Step 6

  • Pull the black battery tap upwards to remove the battery.
  • The battery adhesive is strong, do not be afraid to use force. You may need to use the spudger or opening tool as a wedge.

Pull the black battery tap upwards to remove the battery.

The battery adhesive is strong, do not be afraid to use force. You may need to use the spudger or opening tool as a wedge.

Step 7

              Power Switch Board
  • Disconnect the power switch cable from the motherboard.

Disconnect the power switch cable from the motherboard.

Step 8

  • Remove the two 3 mm screws that secure the power switch board on the computer.

Remove the two 3 mm screws that secure the power switch board on the computer.

Step 9

  • Lift the power switchboard away from the computer.

Lift the power switchboard away from the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Haley Smith

Member since: 09/01/2021

296 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       Gateway, Team 1-5, Saknee Fall 2021                        

                                                  Member of Gateway, Team 1-5, Saknee Fall 2021 



                    GCC-SAKNEE-F21S1G5                     


                                            3 Members                     


                                            6 Guides authored