Difficulty
Easy
Steps
4
Time Required
15 - 30 minutes
Sections
2
- Base Cover
- 2 steps
- M.2 SSD
- 2 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackDell Latitude 3190
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before starting this repair, power off your device and unplug from the charger.
What you need
Step 1
Base Cover
- Use a Phillips #0 screwdriver to remove the seven 7 mm screws securing the back case.
Use a Phillips #0 screwdriver to remove the seven 7 mm screws securing the back case.
1024
Step 2
- Using a plastic opening tool carefully separate the plastic base cover from the rest of the laptop.
- Lift the bottom cover from the laptop.
Using a plastic opening tool carefully separate the plastic base cover from the rest of the laptop.
Lift the bottom cover from the laptop.
Step 3
M.2 SSD
- Use a spudger to disconnect the battery cable from the motherboard located at the top of the battery.
Use a spudger to disconnect the battery cable from the motherboard located at the top of the battery.
Step 4
- Locate the M.2 SSD after the battery is removed
- Use the Phillips #0 screwdriver to remove the 3 mm screw from the SSD.
- Pull the M.2 SSD from the board.
Locate the M.2 SSD after the battery is removed
Use the Phillips #0 screwdriver to remove the 3 mm screw from the SSD.
Pull the M.2 SSD from the board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Daniel Tzunum
Member since: 09/01/2021
193 Reputation
2 Guides authored
Badges:
2
Team
Gateway, Team 1-5, Saknee Fall 2021
Member of Gateway, Team 1-5, Saknee Fall 2021
GCC-SAKNEE-F21S1G5
3 Members
6 Guides authored
Tim Walker - Dec 14, 2022
Reply
It’s worth noting that some Latitude 3190s use eMMC storage, and these lack the M2 socket on the motherboard, although it would be possible to solder one on (the 80mm standoff and screw are present!)