Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Front Facing Camera
- 4 steps
Flags
0
BackDell Latitude 10-ST2e
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Facing Camera
- Using the blue opening tool, separate the back plastic cover from the device. Start in a corner, and work your way around the tablet.
Using the blue opening tool, separate the back plastic cover from the device. Start in a corner, and work your way around the tablet.
1024
Step 2
- Using a JIS #00 screwdriver, remove the one 4.0mm screw securing the camera to the motherboard.
Using a JIS #00 screwdriver, remove the one 4.0mm screw securing the camera to the motherboard.
Step 3
- Use an opening tool to release the black clamp. With the tweezers gently lift and disconnect the motherboad from the camera.
Use an opening tool to release the black clamp. With the tweezers gently lift and disconnect the motherboad from the camera.
Step 4
- Gently lift up the camera using the plastic opening tool and remove it from the tablet.
Gently lift up the camera using the plastic opening tool and remove it from the tablet.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Khawja
Member since: 09/25/2017
258 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
USF Tampa, Team S16-G4, Eyestone Fall 2017
Member of USF Tampa, Team S16-G4, Eyestone Fall 2017
USFT-EYESTONE-F17S16G4
4 Members
12 Guides authored
