Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Charging Port
- 4 steps
Flags
0
BackDell Latitude 10-ST2e
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Charging Port
- Remove the backplate of the tablet by using the plastic opening tool to lift it up.
Remove the backplate of the tablet by using the plastic opening tool to lift it up.
1024
Step 2
- Using a JIS #00 screwdriver, remove the two 4.0mm screws securing it to the motherboard.
Using a JIS #00 screwdriver, remove the two 4.0mm screws securing it to the motherboard.
Step 3
- Lift up the orange clamp connecting the black DOC B/D cable to the charging board.
Lift up the orange clamp connecting the black DOC B/D cable to the charging board.
Step 4
- Place the opening tool underneath the charging board, lift up, and slide it out the charging port, along with its board.
Place the opening tool underneath the charging board, lift up, and slide it out the charging port, along with its board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Khawja
Member since: 09/25/2017
258 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
USF Tampa, Team S16-G4, Eyestone Fall 2017
Member of USF Tampa, Team S16-G4, Eyestone Fall 2017
USFT-EYESTONE-F17S16G4
4 Members
12 Guides authored