Difficulty
Moderate
Steps
9
Time Required
10 minutes
Sections
2
- Battery
- 2 steps
- Keyboard
- 7 steps
Flags
0
BackDell Inspiron 15 (N5030)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the computer over on its back so the battery compartment faces towards you.
- Place your fingers on the small buttons with arrows pointing outwards.
- Push and slide the buttons outward to unlock the battery compartment.
Turn the computer over on its back so the battery compartment faces towards you.
Place your fingers on the small buttons with arrows pointing outwards.
Push and slide the buttons outward to unlock the battery compartment.
1024
Step 2
- Grab the battery and pull it towards yourself.
- Remove the battery.
Grab the battery and pull it towards yourself.
Remove the battery.
Step 3
Keyboard
- Use a Phillips #0 screwdriver to unscrew the sixteen 0.6 mm screws on the back panel.
Use a Phillips #0 screwdriver to unscrew the sixteen 0.6 mm screws on the back panel.
Step 4
- Flip over the laptop and open it so that the screen faces you.
Flip over the laptop and open it so that the screen faces you.
Step 5
- Use the plastic opening tool and your fingers to pry off the top panel.
- Pry the panel off starting at any one of the corners and then continue around the edges of the computer.
Use the plastic opening tool and your fingers to pry off the top panel.
Pry the panel off starting at any one of the corners and then continue around the edges of the computer.
Step 6
- Be careful when lifting off the keyboard panel. There are multiple delicate cables connecting the panel to the motherboard.
- Pull up on the blue plastic tab connected by the white strip to unhook the keyboard panel from the motherboard.
Be careful when lifting off the keyboard panel. There are multiple delicate cables connecting the panel to the motherboard.
Pull up on the blue plastic tab connected by the white strip to unhook the keyboard panel from the motherboard.
Step 7
- Flip up the small locking flap on the keyboard cable ZIF socket and disconnect the keyboard ribbon cable.
Flip up the small locking flap on the keyboard cable ZIF socket and disconnect the keyboard ribbon cable.
Step 8
- Pull up on the wire tab with the blue, white, black, and red wires to detach the speakers from the motherboard.
Pull up on the wire tab with the blue, white, black, and red wires to detach the speakers from the motherboard.
Step 9
- Remove the top keyboard panel.
Remove the top keyboard panel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 5 other contributors
Gunnar Salazar
Member since: 09/30/2013
128 Reputation
1 Guide authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 10-59, Amido Spring 2014
Member of Cal Poly, Team 10-59, Amido Spring 2014
CPSU-AMIDO-S14S10G59
4 Members
5 Guides authored
oibrahimopeyemi - Feb 16, 2016
Reply
What if i broke the blue ribbons connection to the keyboard
Agropecuaria El Sinu - Jul 21, 2017
Reply
This solution is quite troublesome and does not explain how to disconnect / re-connect the wide flat keyboard cable. For a simpler solution see :
