Difficulty

Moderate

Steps

10

Time Required

                          15 - 20 minutes

Sections

2

  • Battery
  • 3 steps
  • Screen
  • 7 steps

Flags

0

  • BackDell Inspiron 14R N4110

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Make sure the laptop is off and unplugged before starting this step.
  • Locate the battery on the underside of the laptop.
  • Push the two battery clips following the direction of the arrows.

Make sure the laptop is off and unplugged before starting this step.

Locate the battery on the underside of the laptop.

Push the two battery clips following the direction of the arrows.

1024

Step 2

  • Push upward from the base of the battery.

Push upward from the base of the battery.

Step 3

  • Pull battery away from computer until it is fully removed.

Pull battery away from computer until it is fully removed.

Step 4

              Screen
  • Use your hands to remove the plastic cover from around the screen.
  • This can seem difficult, but it can be done.

Use your hands to remove the plastic cover from around the screen.

This can seem difficult, but it can be done.

Step 5

  • Unscrew the two 2.5x4 mm screws from the top of the screen.

Unscrew the two 2.5x4 mm screws from the top of the screen.

Step 6

  • Loosen the four 2.5x4 mm screws from the base of the screen.
  • This will allow the screen to lift from inside the top of the case.

Loosen the four 2.5x4 mm screws from the base of the screen.

This will allow the screen to lift from inside the top of the case.

Step 7

  • Unscrew the four 2x3 mm screws from the two sides on both the top and bottom.

Unscrew the four 2x3 mm screws from the two sides on both the top and bottom.

Step 8

  • Use tweezers to peel the webcam away from the top of the laptop.
  • The webcam is only held in place by a webcam, this is easy to pull away from the screen.

Use tweezers to peel the webcam away from the top of the laptop.

The webcam is only held in place by a webcam, this is easy to pull away from the screen.

Step 9

  • Lift the adhesive flap from the cord that connects the computer to the screen.
  • You can then disconnect the cord from the screen.

Lift the adhesive flap from the cord that connects the computer to the screen.

You can then disconnect the cord from the screen.

Step 10

  • The screen can now be fully removed from the computer.

The screen can now be fully removed from the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Abigail Keith

Member since: 03/20/2018

469 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team S5-G1, Peak Spring 2018                        

                                                  Member of UMass Dartmouth, Team S5-G1, Peak Spring 2018 



                    UMASSD-PEAK-S18S5G1                     


                                            3 Members                     


                                            6 Guides authored