Difficulty

Easy

Steps

7

Time Required

                          5 - 10 minutes

Sections

2

  • Battery
  • 3 steps
  • RAM
  • 4 steps

Flags

0

  • BackDell Inspiron 14R N4110

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Make sure the laptop is off and unplugged before starting this step.
  • Locate the battery on the underside of the laptop.
  • Push the two battery clips following the direction of the arrows.

Make sure the laptop is off and unplugged before starting this step.

Locate the battery on the underside of the laptop.

Push the two battery clips following the direction of the arrows.

1024

Step 2

  • Push upward from the base of the battery.

Push upward from the base of the battery.

Step 3

  • Pull battery away from computer until it is fully removed.

Pull battery away from computer until it is fully removed.

Step 4

              RAM
  • Locate and unscrew the one 2.5x5 mm screw on the cover.
  • The screw does not detach from the cover. Make sure the screw is fully unscrewed before attempting to remove the cover.

Locate and unscrew the one 2.5x5 mm screw on the cover.

The screw does not detach from the cover. Make sure the screw is fully unscrewed before attempting to remove the cover.

Step 5

  • Remove RAM cover from the laptop.

Remove RAM cover from the laptop.

Step 6

  • Use your fingers to separate the two metal clips from the RAM.
  • The RAM will lift up when properly separated. Do not force the RAM out of the clips.

Use your fingers to separate the two metal clips from the RAM.

The RAM will lift up when properly separated. Do not force the RAM out of the clips.

Step 7

  • Remove the RAM from the computer.
  • Be careful as to not touch the metal on the bottom of the RAM. This can cause damage.
  • The RAM should be placed on a non-conductive surface.

Remove the RAM from the computer.

Be careful as to not touch the metal on the bottom of the RAM. This can cause damage.

The RAM should be placed on a non-conductive surface.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Olivia

Member since: 03/20/2018

704 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team S5-G1, Peak Spring 2018                        

                                                  Member of UMass Dartmouth, Team S5-G1, Peak Spring 2018 



                    UMASSD-PEAK-S18S5G1                     


                                            3 Members                     


                                            6 Guides authored