Difficulty

Easy

Steps

8

Time Required

                          4 - 15 minutes

Sections

1

  • Hard Drive
  • 8 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 14R (N4010)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the Screws
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  • Remove the two screws that secure the hard-drive assembly to the system board.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

Remove the two screws that secure the hard-drive assembly to the system board.

1024

Step 2

              Sliding the Hard-Drive Assembly
  • Slide the hard-drive assembly to disconnect it from the connector on the system board.

Slide the hard-drive assembly to disconnect it from the connector on the system board.

Step 3

              Lifting the Hard Drive Assembly
  • Lift the hard-drive assembly away from the system board.

Lift the hard-drive assembly away from the system board.

Step 4

              Remove the Screws
  • Remove the four screws that secure the hard-drive bracket to the hard drive.

Remove the four screws that secure the hard-drive bracket to the hard drive.

Step 5

              Lifting the Hard-Drive Bracket
  • Lift the hard-drive bracket off the hard drive.

Lift the hard-drive bracket off the hard drive.

Step 6

              Align the Screw Holes
  • Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive and replace the four screws.

Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive and replace the four screws.

Step 7

              Sliding the Hard-Drive Assembly
  • Slide and push the hard-drive assembly to connect it to connector on the system board.

Slide and push the hard-drive assembly to connect it to connector on the system board.

Step 8

              Replace the Screws
  • Replace the two screws that secure the hard-drive assembly to the system board.

Replace the two screws that secure the hard-drive assembly to the system board.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored