Difficulty
Moderate
Steps
9
Time Required
15 - 30 minutes
Sections
3
- Battery
- 1 step
- Keyboard
- 4 steps
- Palm Rest
- 4 steps
Flags
2
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Better Introduction
Improve this guide by completing or revising its introduction.
BackDell Inspiron 15 (M5010)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Make sure laptop is powered off before removing the battery.
- Slide both arrow tabs towards the outer edge of the computer to release the battery.
- Battery is not shown.
Make sure laptop is powered off before removing the battery.
Slide both arrow tabs towards the outer edge of the computer to release the battery.
Battery is not shown.
1024
Step 2
Remove keyboard retaining screw
- Remove Keyboard retaining screw from bottom of laptop.
Remove Keyboard retaining screw from bottom of laptop.
Step 3
- Insert the 6 inch metal ruler, or another flat object into the holes in the top left of the keyboard, the top middle of the keyboard, and the top right of the keyboard to release the keyboard from the computer.
- There are a number of screws on the bottom that required to be removed prior to the keyboard being able to be lifted up.
Insert the 6 inch metal ruler, or another flat object into the holes in the top left of the keyboard, the top middle of the keyboard, and the top right of the keyboard to release the keyboard from the computer.
There are a number of screws on the bottom that required to be removed prior to the keyboard being able to be lifted up.
Step 4
- Lift the keyboard up slightly and push forward in order to release bottom tabs.
Lift the keyboard up slightly and push forward in order to release bottom tabs.
Step 5
- Pull the black tab up and then pull left on keyboard plug to release keyboard.
Pull the black tab up and then pull left on keyboard plug to release keyboard.
Step 6
Palm Rest
- Flip the laptop, so the bottom of the laptop is facing up.
- Remove the seven 6.0mm Phillip #000 screws indicated using the Phillips #000 screwdriver.
Flip the laptop, so the bottom of the laptop is facing up.
Remove the seven 6.0mm Phillip #000 screws indicated using the Phillips #000 screwdriver.
Step 7
- Flip the laptop back over, so that the top of the laptop is facing up.
- Open the laptop.
- Remove all of the indicated 6.0 mm screws with the Phillips #000 screwdriver.
Flip the laptop back over, so that the top of the laptop is facing up.
Open the laptop.
Remove all of the indicated 6.0 mm screws with the Phillips #000 screwdriver.
Step 8
- Unplug the palm rest cables by lifting the black tab up and then pulling on the blue tabs.
Unplug the palm rest cables by lifting the black tab up and then pulling on the blue tabs.
Step 9
- Carefully unsnap and remove the palm rest.
- Place your fingers inside the large circle in the lower right corner to get a good grip.
Carefully unsnap and remove the palm rest.
Place your fingers inside the large circle in the lower right corner to get a good grip.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
April Poucher
Member since: 10/13/2014
1,152 Reputation
10 Guides authored
Badges:
10
+7 more badges
Team
Clemson, Team 1-5, Benson Fall 2014
Member of Clemson, Team 1-5, Benson Fall 2014
CLEM-BENSON-F14S1G5
4 Members
11 Guides authored