Difficulty

Moderate

Steps

9

Time Required

                          2 - 6 minutes

Sections

1

  • Display Assembly
  • 9 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Inspiron 15 (M5010)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the Screws
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  • Turn the computer over and remove the two screws.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

Turn the computer over and remove the two screws.

1024

Step 2

              Disconnect the Cables
  • Disconnect the Mini-Card antenna cables from the Mini-Card.

Disconnect the Mini-Card antenna cables from the Mini-Card.

Step 3

              Disconnect the Display Cable
  • Disconnect the display cable from the connector on the system board and remove it from the routing guide.

Disconnect the display cable from the connector on the system board and remove it from the routing guide.

Step 4

              Remove the Screws
  • Remove the four screws (two on each side) that secure the display assembly to the computer base.

Remove the four screws (two on each side) that secure the display assembly to the computer base.

Step 5

              Lifting the Display Assembly
  • Lift and remove the display assembly out of the computer base.

Lift and remove the display assembly out of the computer base.

Step 6

              Placing the Display Assembly
  • Place the NEW display assembly in position and replace the four screws (two on each side) that secure the display assembly to the computer base.

Place the NEW display assembly in position and replace the four screws (two on each side) that secure the display assembly to the computer base.

Step 7

              Route the Display Cable
  • Route the display cable into the routing guide and connect the cable to the connector on the system board.

Route the display cable into the routing guide and connect the cable to the connector on the system board.

Step 8

              Connecting the Mini-Card Antenna Cables
  • Connect the Mini-Card antenna cables to the connectors on the Mini- Card.

Connect the Mini-Card antenna cables to the connectors on the Mini- Card.

Step 9

              Replace the Screws
  • Turn the computer over and replace the two screws at the bottom of the computer.

Turn the computer over and replace the two screws at the bottom of the computer.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored