Difficulty

Moderate

Steps

7

Time Required

                          10 minutes

Sections

2

  • Battery
  • 2 steps
  • LCD Screen
  • 5 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackDell Inspiron E1405

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Save your work, power the laptop off, and ensure that the charging cable is unplugged before removing the battery.
  • Flip the laptop over.
  • Locate the battery release switch on the bottom of the laptop.

Save your work, power the laptop off, and ensure that the charging cable is unplugged before removing the battery.

Flip the laptop over.

Locate the battery release switch on the bottom of the laptop.

1024

Step 2

  • Slide the battery release switch away from the lock symbol until you hear the battery click.
  • Slide the battery towards the back of the laptop until it comes free.

Slide the battery release switch away from the lock symbol until you hear the battery click.

Slide the battery towards the back of the laptop until it comes free.

Step 3

              LCD Screen
  • Use your fingers or a spudger to remove the six small rubber covers off the display assembly.
  • Remove the six 5.7 mm screws with a Phillips #00 screwdriver.

Use your fingers or a spudger to remove the six small rubber covers off the display assembly.

Remove the six 5.7 mm screws with a Phillips #00 screwdriver.

Step 4

  • Use your fingers to gently pry the front bezel off the display assembly. Start at a corner and work your way around.
  • Remove the front display bezel when it comes free.

Use your fingers to gently pry the front bezel off the display assembly. Start at a corner and work your way around.

Remove the front display bezel when it comes free.

Step 5

  • Remove the three 3.6 mm screws using a Phillips #00 screwdriver on both sides of the display.
  • Remove the LCD screen from the display assembly.

Remove the three 3.6 mm screws using a Phillips #00 screwdriver on both sides of the display.

Remove the LCD screen from the display assembly.

Step 6

  • Unplug the VGA cable by pushing the two metal sides towards the middle of the strip.
  • Gently pull the VGA cable away to release the strip.

Unplug the VGA cable by pushing the two metal sides towards the middle of the strip.

Gently pull the VGA cable away to release the strip.

Step 7

  • Remove the next connection by pressing the two metal sides towards the middle. Then gently pull up the ribbon.

Remove the next connection by pressing the two metal sides towards the middle. Then gently pull up the ribbon.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Sarah Neal Secrest

Member since: 03/20/2017

597 Reputation

                                      5 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Texas Tech, Team S8-G3, Bennett Spring 2017                        

                                                  Member of Texas Tech, Team S8-G3, Bennett Spring 2017 



                    TTU-BENNETT-S17S8G3                     


                                            3 Members                     


                                            5 Guides authored

St Master Fun - Apr 30, 2022

Reply

I need complete body *Dell INSPIRON E1405 .