Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

2

  • Battery
  • 5 steps
  • CPU
  • 3 steps

Flags

1

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackDell Inspiron B130

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • First, make sure your computer is turned off.
  • Remove the battery by flipping the two switches under the battery and pulling it out

First, make sure your computer is turned off.

Remove the battery by flipping the two switches under the battery and pulling it out

1024

Step 2

  • Before we remove the keyboard, we have to remove the plastic cover
  • Stick the plastic prying tool right here and gently lift it up.

Before we remove the keyboard, we have to remove the plastic cover

Stick the plastic prying tool right here and gently lift it up.

Step 3

  • Remove the two screws to loosen the keyboard
  • Do not lift the keyboard out yet, it is still connected via the ribbon cable.
  • Carefully disconnect the ribbon cable

Remove the two screws to loosen the keyboard

Do not lift the keyboard out yet, it is still connected via the ribbon cable.

Carefully disconnect the ribbon cable

Step 4

  • Push the tab from the battery, downwards to unlock the battery.
  • The tab should be in the position next to the unlocked indicator.

Push the tab from the battery, downwards to unlock the battery.

The tab should be in the position next to the unlocked indicator.

Step 5

  • Now, push the other tab (the one right under the battery) from right to left.
  • Now the battery will be loose; lift the battery up and out of the computer.

Now, push the other tab (the one right under the battery) from right to left.

Now the battery will be loose; lift the battery up and out of the computer.

Step 6

              CPU
  • Remove the 6 mm screw.
  • Lift the plastic cover off.

Remove the 6 mm screw.

Lift the plastic cover off.

Step 7

  • Loosen the 4 screws.
  • These screws stay connected to the heat sink.
  • Remove the heat sink from the computer.

Loosen the 4 screws.

These screws stay connected to the heat sink.

Remove the heat sink from the computer.

Step 8

  • Use a flat head screwdriver to turn the screw one quarter turn into the unlock position.
  • Remove the CPU.

Use a flat head screwdriver to turn the screw one quarter turn into the unlock position.

Remove the CPU.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Patrick McNeil

Member since: 10/19/2016

937 Reputation

                                      8 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       UMass Dartmouth, Team 1-8, Catania Fall 2016                        

                                                  Member of UMass Dartmouth, Team 1-8, Catania Fall 2016 



                    UMASSD-CATANIA-F16S1G8                     


                                            3 Members                     


                                            9 Guides authored