Difficulty

Easy

Steps

3

Time Required

                          10 minutes            

Sections

2

  • Modem & WIFI Card Prerequisite
  • 2 steps
  • Modem Card
  • 1 step

Flags

0

  • BackDell Inspiron 9300

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Modem & WIFI Card Prerequisite               
  • Flip the computer over and place it on a clean level surface.
  • Loosen the screws using a size #0 Phillips screwdriver.
  • The screws do not come completely out.
  • It is strongly recommended that the Anti-Static Wrist Strap is used to avoid damage to internal components.

Flip the computer over and place it on a clean level surface.

Loosen the screws using a size #0 Phillips screwdriver.

The screws do not come completely out.

It is strongly recommended that the Anti-Static Wrist Strap is used to avoid damage to internal components.

1024

Step 2

  • Once the screws are loose, open the panel using a plastic opening tool to access the components below.
  • The modem card should be labeled MODEM. The WIFI card is larger than the modem and closer to the outer edge of the computer.

Once the screws are loose, open the panel using a plastic opening tool to access the components below.

The modem card should be labeled MODEM. The WIFI card is larger than the modem and closer to the outer edge of the computer.

Step 3

              Modem Card               
  • Remove the screw holding the card in place using a size #0 Phillips screwdriver.
  • Gently unplug the card from the connecting black wire using a black spudger.
  • The modem can now be safely removed.

Remove the screw holding the card in place using a size #0 Phillips screwdriver.

Gently unplug the card from the connecting black wire using a black spudger.

The modem can now be safely removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Randy McMillan                     

Member since: 09/21/2016

738 Reputation

                                      4 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored