Difficulty

Easy

Steps

9

Time Required

                          5 minutes

Sections

5

  • Battery
  • 1 step
  • Hinge Cover
  • 2 steps
  • Keyboard
  • 1 step
  • Display Module
  • 4 steps
  • Upper Case
  • 1 step

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackDell Inspiron 8600

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the battery from the bottom left of the laptop. It is a long, rectangular shape.
  • Please click on the following link for further instruction on how to remove the battery. Dell Inspiron 9100 Battery Replacement
  • Remove the battery before operating on the computer to avoid electrocution.

Remove the battery from the bottom left of the laptop. It is a long, rectangular shape.

Please click on the following link for further instruction on how to remove the battery. Dell Inspiron 9100 Battery Replacement

Remove the battery before operating on the computer to avoid electrocution.

1024

Step 2

              Hinge Cover
  • Insert a spudger into the notch at the far left side of the top blue panel and pry the hinge cover off.
  • You may need to pry the other side off as well. You can do this by inserting the spudger between the hinge and the top cover.
  • Be careful of the wire attached to the underside of the hinge cover.

Insert a spudger into the notch at the far left side of the top blue panel and pry the hinge cover off.

You may need to pry the other side off as well. You can do this by inserting the spudger between the hinge and the top cover.

Be careful of the wire attached to the underside of the hinge cover.

Step 3

  • Pull the small black tab on the right hand side of the laptop.
  • You have now removed the hinge cover.

Pull the small black tab on the right hand side of the laptop.

You have now removed the hinge cover.

Step 4

              Keyboard
  • Using the Phillips #1 remove the screws at the top of the keyboard as indicated.
  • Do not just lift up. There is a tab underneath the keyboard that is still connected to the mother board.
  • You will need to pull out the white tab underneath the keyboard upwards until it pops out of its socket.
  • The keyboard should be easily removable at this point.

Using the Phillips #1 remove the screws at the top of the keyboard as indicated.

Do not just lift up. There is a tab underneath the keyboard that is still connected to the mother board.

You will need to pull out the white tab underneath the keyboard upwards until it pops out of its socket.

The keyboard should be easily removable at this point.

Step 5

              Display Module
  • Flip the laptop over and remove the indicated screws.
  • Flip the laptop back over.
  • Find the two places where the display module is attached to the base of the computer.

Flip the laptop over and remove the indicated screws.

Flip the laptop back over.

Find the two places where the display module is attached to the base of the computer.

Step 6

  • Disconnect the video card from the display module by gently lifting upwards on the black tab.

Disconnect the video card from the display module by gently lifting upwards on the black tab.

Step 7

  • Lift the display module directly upwards from the base of the computer.

Lift the display module directly upwards from the base of the computer.

Step 8

  • Now remove the display module.

Now remove the display module.

Step 9

              Upper Case
  • Remove the two screws that hold the upper case.
  • You can now pop up the upper case and replace.

Remove the two screws that hold the upper case.

You can now pop up the upper case and replace.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 6 other contributors 


                    John Nesthus

Member since: 04/13/2011

186 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 18-22, Garner Spring 2011                        

                                                  Member of Cal Poly, Team 18-22, Garner Spring 2011 



                    CPSU-GARNER-S11S18G22                     


                                            4 Members                     


                                            16 Guides authored