Dell Inspiron 7573 2 In 1 Wi Fi Card Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Battery
4 steps
Wi-Fi Card
1 step

Flags

BackDell Inspiron 7573 2-in-1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Make sure computer is off before you begin.
Remove the four 5 mm screws from the bottom edge of the laptop using a Phillips #00 screwdriver.
Loosen the remaining six captive screws from the bottom cover with a Phillips #00 screwdriver.

Make sure computer is off before you begin.

Remove the four 5 mm screws from the bottom edge of the laptop using a Phillips #00 screwdriver.

Loosen the remaining six captive screws from the bottom cover with a Phillips #00 screwdriver.

1024

Step 2

Using a spudger, pry off the bottom cover by gently prying from corner to corner in order to disengage the plastic clips.
Lift off the bottom cover.
After the base cover is removed, your laptop should look similar as depicted in the images provided.

Using a spudger, pry off the bottom cover by gently prying from corner to corner in order to disengage the plastic clips.

Lift off the bottom cover.

After the base cover is removed, your laptop should look similar as depicted in the images provided.

Step 3

Remove the four 3 mm screws holding the battery in place with a Phillips #00 screwdriver.

Remove the four 3 mm screws holding the battery in place with a Phillips #00 screwdriver.

Step 4

Using the pull tab, disconnect the battery cable from the system board.
Lift the battery out from the laptop case.

Using the pull tab, disconnect the battery cable from the system board.

Lift the battery out from the laptop case.

Step 5

              Wi-Fi Card

Using a Phillips #00 screwdriver, remove the 3 mm screw that secures the wireless-card bracket and wireless card to the I/O board.
Lift the wireless-card bracket off of the wireless card.
Disconnect the white and black antenna cables from the wireless card.
Slide and remove the wireless card from the wireless card slot.

Using a Phillips #00 screwdriver, remove the 3 mm screw that secures the wireless-card bracket and wireless card to the I/O board.

Lift the wireless-card bracket off of the wireless card.

Disconnect the white and black antenna cables from the wireless card.

Slide and remove the wireless card from the wireless card slot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                    Austin Blakely

Member since: 03/11/2019

16,291 Reputation

                                      52 Guides authored                  



                       Badges:
                       37







                                                        +34 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team