Difficulty

Moderate

Steps

7

Time Required

                          8 minutes

Sections

4

  • Battery
  • 2 steps
  • RAM
  • 2 steps
  • Cooling Fan
  • 2 steps
  • Motherboard
  • 1 step

Flags

1

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackDell Inspiron 15-7568

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the ten 7mm Phillips #1 screws on the bottom cover.
  • Remove the bottom cover.

Remove the ten 7mm Phillips #1 screws on the bottom cover.

Remove the bottom cover.

1024

Step 2

  • Remove the four 3mm Phillips #1 screws holding the battery.
  • Unhinge the connector cable to the battery.
  • Remove the battery.

Remove the four 3mm Phillips #1 screws holding the battery.

Unhinge the connector cable to the battery.

Remove the battery.

Step 3

              RAM
  • Release the RAM by unhinging the connecting bars outward.

Release the RAM by unhinging the connecting bars outward.

Step 4

  • Remove the RAM.

Remove the RAM.

Step 5

              Cooling Fan
  • Begin by unclipping the cable connecting the fan and the motherboard.
  • Gently separate the motherboard cable from the clamp at the bottom of the fan.
  • Remove the cable.

Begin by unclipping the cable connecting the fan and the motherboard.

Gently separate the motherboard cable from the clamp at the bottom of the fan.

Remove the cable.

Step 6

  • Remove the two 3mm Phillips #1 screws that hold the fan into place.
  • Remove the fan.

Remove the two 3mm Phillips #1 screws that hold the fan into place.

Remove the fan.

Step 7

              Motherboard
  • Remove six 3mm Phillips #1 screws to fully remove the motherboard.
  • Disconnect the various connection points from the motherboard to the laptop.
  • Remove the motherboard.

Remove six 3mm Phillips #1 screws to fully remove the motherboard.

Disconnect the various connection points from the motherboard to the laptop.

Remove the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Elijah Basile

Member since: 11/06/2019

337 Reputation

                                      4 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       IUPUI, Team S1-G4, Stella Fall 2019                        

                                                  Member of IUPUI, Team S1-G4, Stella Fall 2019 



                    IUPUI-STELLA-F19S1G4                     


                                            4 Members                     


                                            4 Guides authored