Dell Inspiron 7568 Display Assembly Replacement Guide Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 minutes            

Sections

2

• Battery
• 2 steps
• Display Assembly
• 4 steps

Flags

1

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

• BackDell Inspiron 15-7568

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the ten 7mm Phillips #1 screws on the bottom cover.
• Remove the bottom cover.

Remove the ten 7mm Phillips #1 screws on the bottom cover.

Remove the bottom cover.

1024

Step 2

• Remove the four 3mm Phillips #1 screws holding the battery.
• Unhinge the connector cable to the battery.
• Remove the battery.

Remove the four 3mm Phillips #1 screws holding the battery.

Unhinge the connector cable to the battery.

Remove the battery.

Step 3

              Display Assembly               

• Unscrew & remove the two 3mm screws (using a ph1 screwdriver bit) and the cable bracket, above the motherboard
• Doing this will allow one to access the LCD-motherboard connector cables.

Unscrew & remove the two 3mm screws (using a ph1 screwdriver bit) and the cable bracket, above the motherboard

Doing this will allow one to access the LCD-motherboard connector cables.

Step 4

• Unscrew the 7mm screws that secure the left and right hinges (using a ph1 screwdriver bit).

Unscrew the 7mm screws that secure the left and right hinges (using a ph1 screwdriver bit).

Step 5

• Disconnect the antenna cable (under the left hinge)
• Disconnect the LCD and Touchscreen display cables under the right hinge.
• These are a set of two cables. For better image see image two in step one of this guide.

Disconnect the antenna cable (under the left hinge)

Disconnect the LCD and Touchscreen display cables under the right hinge.

These are a set of two cables. For better image see image two in step one of this guide.

Step 6

• Carefully separate the screen from the bottom half of the device.

Carefully separate the screen from the bottom half of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Yash Samant                     

Member since: 02/22/2017

373 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       USF Tampa, Team S2-G2, Lacy Spring 2017                        

                                                  Member of USF Tampa, Team S2-G2, Lacy Spring 2017 



                    USFT-LACY-S17S2G2                     


                                            4 Members                     


                                            7 Guides authored