Difficulty
Moderate
Steps
4
Time Required
5 minutes
Sections
2
- Battery
- 2 steps
- Cooling Fan
- 2 steps
Flags
1
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackDell Inspiron 15-7568
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the ten 7mm Phillips #1 screws on the bottom cover.
- Remove the bottom cover.
Remove the ten 7mm Phillips #1 screws on the bottom cover.
Remove the bottom cover.
1024
Step 2
- Remove the four 3mm Phillips #1 screws holding the battery.
- Unhinge the connector cable to the battery.
- Remove the battery.
Remove the four 3mm Phillips #1 screws holding the battery.
Unhinge the connector cable to the battery.
Remove the battery.
Step 3
Cooling Fan
- Begin by unclipping the cable connecting the fan and the motherboard.
- Gently separate the motherboard cable from the clamp at the bottom of the fan.
- Remove the cable.
Begin by unclipping the cable connecting the fan and the motherboard.
Gently separate the motherboard cable from the clamp at the bottom of the fan.
Remove the cable.
Step 4
- Remove the two 3mm Phillips #1 screws that hold the fan into place.
- Remove the fan.
Remove the two 3mm Phillips #1 screws that hold the fan into place.
Remove the fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 7 other contributors
Yash Samant
Member since: 02/22/2017
373 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team S2-G2, Lacy Spring 2017
Member of USF Tampa, Team S2-G2, Lacy Spring 2017
USFT-LACY-S17S2G2
4 Members
7 Guides authored
