Dell Inspiron 7000 2 In 1 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 15 minutes

Sections

Battery
10 steps

Flags

BackDell Inspiron 15 7000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Prior to beginning the repair, completely turn your laptop off and unplug from the power source. Remember to properly recycle your old battery.

What you need

Step 1

              Battery

Flip your Dell Inspiron 7000 2 in 1 laptop upside down to get started. Find the locations of all the 10 screws.
Remember to turn the laptop off before you begin the repair.

Flip your Dell Inspiron 7000 2 in 1 laptop upside down to get started. Find the locations of all the 10 screws.

Remember to turn the laptop off before you begin the repair.

1024

Step 2

Using your Phillips #00 screwdriver, remove the ten 7.00 mm screws at the bottom of the laptop.

Using your Phillips #00 screwdriver, remove the ten 7.00 mm screws at the bottom of the laptop.

Step 3

Insert the spudger in the gap between the bottom cover and the frame. Then, use it as a wedge and work your way around the perimeter. This will pop open the bottom cover of the laptop.

Insert the spudger in the gap between the bottom cover and the frame. Then, use it as a wedge and work your way around the perimeter. This will pop open the bottom cover of the laptop.

Step 4

Find the battery located at the bottom right corner of the laptop.

Find the battery located at the bottom right corner of the laptop.

Step 5

Now remove the four 4.0 mm Phillips #00 screws located at each corner of the battery.

Now remove the four 4.0 mm Phillips #00 screws located at each corner of the battery.

Step 6

Remove the battery pin that is connecting the motherboard to the battery by pulling out the pin gently.
Remember to safely recycle your old laptop battery.

Remove the battery pin that is connecting the motherboard to the battery by pulling out the pin gently.

Remember to safely recycle your old laptop battery.

Step 7

Reinsert the battery pin into the new battery and place it back into its position.

Reinsert the battery pin into the new battery and place it back into its position.

Step 8

Screw the four 4.0 mm Phillips #00 head screws for the battery back into place to make sure the battery is held on securely.

Screw the four 4.0 mm Phillips #00 head screws for the battery back into place to make sure the battery is held on securely.

Step 9

Place the cover back onto the laptop and press down on all corners and sides.
Make sure to listen for a click to ensure the cover is properly secured.

Place the cover back onto the laptop and press down on all corners and sides.

Make sure to listen for a click to ensure the cover is properly secured.

Step 10

Use the Phillips #00 screwdriver to replace the ten 7.00 mm screws on the back cover.

Use the Phillips #00 screwdriver to replace the ten 7.00 mm screws on the back cover.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Neelay Patel

Member since: 09/17/2021

189 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       York University, Team E-31, Melo-Thaiss Fall 2021                        

                                                  Member of York University, Team E-31, Melo-Thaiss Fall 2021 



                    YORK-MELO-THAISS-F21SEG31                     


                                            1 Member                     


                                            1 Guide authored

Introduction#

What you need#

Team#

Introduction

What you need

Team