Difficulty
Easy
Steps
5
Time Required
3 - 5 minutes
Sections
1
- RAM
- 5 steps
Flags
0
BackDell Inspiron 3537
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Use a Phillips #0 screwdriver to loosen the two 3 mm captive screws holding the tray in place.
- The screws cannot be fully removed and only need to be loosened. Do not attempt to remove the screws from the tray.
- Lift the RAM tray up and off.
Use a Phillips #0 screwdriver to loosen the two 3 mm captive screws holding the tray in place.
The screws cannot be fully removed and only need to be loosened. Do not attempt to remove the screws from the tray.
Lift the RAM tray up and off.
1024
Step 2
- Gently pull the two silver arms away from the RAM until the RAM slightly lifts from the motherboard.
Gently pull the two silver arms away from the RAM until the RAM slightly lifts from the motherboard.
Step 3
- Slide the RAM directly out of its slot.
Slide the RAM directly out of its slot.
Step 4
- Insert your new/replacement RAM stick(s) into the slot(s).
- Gently push down on the RAM until it clicks into place.
Insert your new/replacement RAM stick(s) into the slot(s).
Gently push down on the RAM until it clicks into place.
Step 5
- Replace the RAM tray.
- Screw in the two 3 mm screws with a Phillips #0 screwdriver.
Replace the RAM tray.
Screw in the two 3 mm screws with a Phillips #0 screwdriver.
Enjoy your new RAM!
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Shazil Mutahir
Member since: 01/18/2022
121 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
York University, Team P-22, O'Regan Winter 2022
Member of York University, Team P-22, O'Regan Winter 2022
YORK-O'REGAN-W22SPG22
1 Member
1 Guide authored
