Dell Inspiron 17R 5721 Ram Replacement Repair Guide

Difficulty

Very easy

Steps

Time Required

                          1 minute

Sections

Battery
2 steps
Access Panel
2 steps
RAM
2 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

BackDell Inspiron 17R-5721
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Located on the bottom of the laptop’s external shell, there should be two plastic sliding tabs to the right and left of the battery pack. Using your fingers, push these two tabs away from each other, toward the sides of the machine.
This mechanically unlocks the battery pack from its slot at the back of the machine.

Located on the bottom of the laptop’s external shell, there should be two plastic sliding tabs to the right and left of the battery pack. Using your fingers, push these two tabs away from each other, toward the sides of the machine.

This mechanically unlocks the battery pack from its slot at the back of the machine.

1024

Step 2

Using your fingernails, pry the battery pack away from the rest of the machine, at the physical seam between the pack and the laptop’s plastic case.
This may take some effort to accomplish.
Remove the battery.

Using your fingernails, pry the battery pack away from the rest of the machine, at the physical seam between the pack and the laptop’s plastic case.

This may take some effort to accomplish.

Remove the battery.

Step 3

              Access Panel

Using a Phillips #000 screwdriver, loosen the two screws at the top left and top right of the access door.
These two captive screws will loosen but will not separate from the panel.

Using a Phillips #000 screwdriver, loosen the two screws at the top left and top right of the access door.

These two captive screws will loosen but will not separate from the panel.

Step 4

Using a spudger, pry into the gap in the plastic revealed by loosening the screws.
Lift off the access panel.

Using a spudger, pry into the gap in the plastic revealed by loosening the screws.

Lift off the access panel.

Step 5

RAM

Using your fingers, separate the metal tabs located on the left and right of each stick of RAM by pulling them apart from each other.

Using your fingers, separate the metal tabs located on the left and right of each stick of RAM by pulling them apart from each other.

Step 6

Pull each RAM stick out of the machine, separating each piece from its respective slot.

Pull each RAM stick out of the machine, separating each piece from its respective slot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Thomas Griffin

Member since: 03/21/2019

915 Reputation

                                      9 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team S2-G6, Bailey Spring 2019                        

                                                  Member of UMass Dartmouth, Team S2-G6, Bailey Spring 2019 



                    UMASSD-BAILEY-S19S2G6                     


                                            3 Members                     


                                            9 Guides authored

Action Shots#

Introduction#

What you need#

Team#

Action Shots

Introduction

What you need

Team