Difficulty

Easy

Steps

4

Time Required

                          1 minute            

Sections

2

  • Battery
  • 2 steps
  • Access Panel
  • 2 steps

Flags

0

  • BackDell Inspiron 17R-5721

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Located on the bottom of the laptop’s external shell, there should be two plastic sliding tabs to the right and left of the battery pack. Using your fingers, push these two tabs away from each other, toward the sides of the machine.
  • This mechanically unlocks the battery pack from its slot at the back of the machine.

Located on the bottom of the laptop’s external shell, there should be two plastic sliding tabs to the right and left of the battery pack. Using your fingers, push these two tabs away from each other, toward the sides of the machine.

This mechanically unlocks the battery pack from its slot at the back of the machine.

1024

Step 2

  • Using your fingernails, pry the battery pack away from the rest of the machine, at the physical seam between the pack and the laptop’s plastic case.
  • This may take some effort to accomplish.
  • Remove the battery.

Using your fingernails, pry the battery pack away from the rest of the machine, at the physical seam between the pack and the laptop’s plastic case.

This may take some effort to accomplish.

Remove the battery.

Step 3

              Access Panel               
  • Using a Phillips #000 screwdriver, loosen the two screws at the top left and top right of the access door.
  • These two captive screws will loosen but will not separate from the panel.

Using a Phillips #000 screwdriver, loosen the two screws at the top left and top right of the access door.

These two captive screws will loosen but will not separate from the panel.

Step 4

  • Using a spudger, pry into the gap in the plastic revealed by loosening the screws.
  • Lift off the access panel.

Using a spudger, pry into the gap in the plastic revealed by loosening the screws.

Lift off the access panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Thomas Griffin                     

Member since: 03/21/2019

915 Reputation

                                      9 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       UMass Dartmouth, Team S2-G6, Bailey Spring 2019                        

                                                  Member of UMass Dartmouth, Team S2-G6, Bailey Spring 2019 



                    UMASSD-BAILEY-S19S2G6                     


                                            3 Members                     


                                            9 Guides authored