Dell Inspiron 17 7786 2 In 1 Speakers Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          3 minutes            

Sections

2

• Base Cover
• 4 steps
• Speakers
• 1 step

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackDell Inspiron 17" 7786 2-in-1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Base Cover               

• Remove the eight M2 5mm screws that secure the base cover using a Phillips #0 screwdriver.

Remove the eight M2 5mm screws that secure the base cover using a Phillips #0 screwdriver.

1024

Step 2

• Loosen the three captive screws that secure the base closer to the hinges.
• Do not attempt to remove the three captive screws! You need only to loosen them. They’re supposed to stay on the base cover.

Loosen the three captive screws that secure the base closer to the hinges.

Do not attempt to remove the three captive screws! You need only to loosen them. They’re supposed to stay on the base cover.

Step 3

• Carefully pry the base cover using an iFixit opening tool in the crevice near the hinges. Guide the pick along the edges and slightly lift upwards as you go along.
• Do not start from the speaker end of the edges when opening, or you may cause further damage to your device!

Carefully pry the base cover using an iFixit opening tool in the crevice near the hinges. Guide the pick along the edges and slightly lift upwards as you go along.

Do not start from the speaker end of the edges when opening, or you may cause further damage to your device!

Step 4

• Carefully remove the base cover from the laptop.

Carefully remove the base cover from the laptop.

Step 5

              Speakers               

• Detach the cable that connects the speakers to the system board.
• Starting with the speaker on the right hand area of the touch pad, carefully guide the speaker cabling out of the enclosure. You need only to lift upwards.

Detach the cable that connects the speakers to the system board.

Starting with the speaker on the right hand area of the touch pad, carefully guide the speaker cabling out of the enclosure. You need only to lift upwards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Antonio Franco                     

Member since: 08/25/2022

977 Reputation

                                      10 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Gateway, Team 1-3, Class Fall 2022                        

                                                  Member of Gateway, Team 1-3, Class Fall 2022 



                    GCC-CLASS-F22S1G3                     


                                            4 Members                     


                                            15 Guides authored