Difficulty

Easy

Steps

8

Time Required

                          7 - 10 minutes            

Sections

1

  • Battery
  • 8 steps

Flags

0

  • BackDell Inspiron 17-7746

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Disconnect the laptop from the AC adapter and turn off the laptop.

Disconnect the laptop from the AC adapter and turn off the laptop.

1024

Step 2

  • Place the laptop so the bottom faces up.

Place the laptop so the bottom faces up.

Step 3

  • Remove the silver 15mm PH 1 screw that holds the plastic cover in place over the battery.
  • Remove the 8mm PH 1 screw that holds the plastic cover in place over the battery.
  • Keep the screws together because the length of the screws will matter when you reassemble.

Remove the silver 15mm PH 1 screw that holds the plastic cover in place over the battery.

Remove the 8mm PH 1 screw that holds the plastic cover in place over the battery.

Keep the screws together because the length of the screws will matter when you reassemble.

Step 4

  • Using the metal jimmy, pry up the first half of the cover.

Using the metal jimmy, pry up the first half of the cover.

Step 5

  • Apply pressure with your fingertips on top of the cover and drag toward the front of the laptop. This will make the plate slide off exposing the hard drive.

Apply pressure with your fingertips on top of the cover and drag toward the front of the laptop. This will make the plate slide off exposing the hard drive.

Step 6

  • Remove the two black PH1 6mm screws that anchor the battery.

Remove the two black PH1 6mm screws that anchor the battery.

Step 7

  • Grab the black tab on the battery with index finger and thumb.
  • If the Tab is broken or missing, use the plastic spudger to pry the battery out far enough to grab the battery by hand.
  • Avoid applying too much pressure on the battery with the plastic spudger. It might puncture the battery.

Grab the black tab on the battery with index finger and thumb.

If the Tab is broken or missing, use the plastic spudger to pry the battery out far enough to grab the battery by hand.

Avoid applying too much pressure on the battery with the plastic spudger. It might puncture the battery.

Step 8

  • Pull upwards, removing the battery from the laptop.
  • Ensure replacement battery has no bulging or has no cracks and lies flat in its location.

Pull upwards, removing the battery from the laptop.

Ensure replacement battery has no bulging or has no cracks and lies flat in its location.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Tucker Harmon                     

Member since: 09/26/2018

282 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Eastern Washington University, Team S1-G5, Carnegie Fall 2018                        

                                                  Member of Eastern Washington University, Team S1-G5, Carnegie Fall 2018 



                    EWU-CARNEGIE-F18S1G5                     


                                            4 Members                     


                                            5 Guides authored