Dell Inspiron 17 5749 Palm Rest Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Battery
2 steps
Back Cover
1 step
Optical Drive
2 steps
Hard Drive
1 step
Keyboard
2 steps
Palm Rest
2 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

BackDell Inspiron 17-5749
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Battery

Turn off power to the laptop.
Unplug the charging cable from the laptop.
Failure to unplug the charging cable could result in damaging the computer or seriously injuring yourself.
Wear the anti-static wrist strap or work in an uncarpeted area to prevent static shocks. Shocks may damage the components.

Turn off power to the laptop.

Unplug the charging cable from the laptop.

Failure to unplug the charging cable could result in damaging the computer or seriously injuring yourself.

Wear the anti-static wrist strap or work in an uncarpeted area to prevent static shocks. Shocks may damage the components.

1024

Step 2

First carefully turn the laptop over so you can access the battery.
Switch each of the battery latches to the “unlocked” position.
Pull battery upwards by the tab to remove from the laptop.

First carefully turn the laptop over so you can access the battery.

Switch each of the battery latches to the “unlocked” position.

Pull battery upwards by the tab to remove from the laptop.

Step 3

              Back Cover

Remove the two 5.5mm screws that secure the base cover to the computer’s base.
Using the plastic opening tool, carefully pry open the base cover starting from the center.
Lift the base cover upwards to remove and set it aside.

Remove the two 5.5mm screws that secure the base cover to the computer’s base.

Using the plastic opening tool, carefully pry open the base cover starting from the center.

Lift the base cover upwards to remove and set it aside.

Step 4

              Optical Drive

Remove the 5.5mm screw that secures the optical-drive assembly to the computer base
Using your fingertips, slide the optical-drive assembly out of the optical drive bay.

Remove the 5.5mm screw that secures the optical-drive assembly to the computer base

Using your fingertips, slide the optical-drive assembly out of the optical drive bay.

Step 5

This step is only needed if replacing the optical drive.
Remove the 2.5mm screw that secures the optical-drive bracket to the optical drive assembly.
Remove the optical-drive bracket from the optical-drive assembly.
Carefully pull the optical-drive bezel and remove it from the optical drive.

This step is only needed if replacing the optical drive.

Remove the 2.5mm screw that secures the optical-drive bracket to the optical drive assembly.

Remove the optical-drive bracket from the optical-drive assembly.

Carefully pull the optical-drive bezel and remove it from the optical drive.

Step 6

              Hard Drive

Remove the 2.5mm screw that secures the hard-drive assembly to the computer base.
Using the pull tab, slide the hard-drive assembly to disconnect it from the system board.
Lift the hard-drive assembly off the computer base

Remove the 2.5mm screw that secures the hard-drive assembly to the computer base.

Using the pull tab, slide the hard-drive assembly to disconnect it from the system board.

Lift the hard-drive assembly off the computer base

Step 7

              Keyboard

Turn the computer over and open the display as far as possible
Using a plastic opening tool, release the tabs that secure the keyboard to the palm-rest assembly.
Before turning over the keyboard, be careful not to pull the keyboard too far away as it could damage the connected ribbon cables.

Turn the computer over and open the display as far as possible

Using a plastic opening tool, release the tabs that secure the keyboard to the palm-rest assembly.

Before turning over the keyboard, be careful not to pull the keyboard too far away as it could damage the connected ribbon cables.

Step 8

Carefully turn the keyboard over and place it on the palm rest assembly.
Lift the latches and disconnect the keyboard cable and keyboard back-light cable from the system board.
Lift the keyboard along with the cables, off the palm-rest assembly and set it aside.

Carefully turn the keyboard over and place it on the palm rest assembly.

Lift the latches and disconnect the keyboard cable and keyboard back-light cable from the system board.

Lift the keyboard along with the cables, off the palm-rest assembly and set it aside.

Step 9

              Palm Rest

Remove the (5) 5.5mm screws that secure the palm rest to the system board.
Close the display and turn the computer over.
Remove the (10) 5.5mm screws that secure the palm rest to the computer base.

Remove the (5) 5.5mm screws that secure the palm rest to the system board.

Close the display and turn the computer over.

Remove the (10) 5.5mm screws that secure the palm rest to the computer base.

Step 10

Turn the computer over and open the display as far as possible.
Lift the connector latches and disconnect the power-button board cable and the touch-pad cable from the system board.
Using a plastic scribe, gently lift and release the tabs on the palm rest around the computer base including the backside.
Lift the palm rest away from the display assembly.

Turn the computer over and open the display as far as possible.

Lift the connector latches and disconnect the power-button board cable and the touch-pad cable from the system board.

Using a plastic scribe, gently lift and release the tabs on the palm rest around the computer base including the backside.

Lift the palm rest away from the display assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Christopher Tran

Member since: 02/13/2018

1,146 Reputation

                                      12 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Washington State, Team S1-G2, Lobnitz Spring 2018                        

                                                  Member of Washington State, Team S1-G2, Lobnitz Spring 2018 



                    WSU-LOBNITZ-S18S1G2                     


                                            6 Members                     


                                            12 Guides authored

Action Shots#

Markup Mishap#

Better Introduction#

What you need#

Team#

Action Shots

Markup Mishap

Better Introduction

What you need

Team